I have a question regarding setting up a routed network using two SXTs and two Routers.
Do I have to bridge both ether1 and wlan together or is there another way without bridging interfaces using IP routes?
Wireless bridge mode
IP on Lan interface is 10.0.0.2/29
IP on Wlan interface is 220.127.116.11/30
Wireless Station bridge mode
IP on Lan interface is 10.0.0.3/29
IP on Wlan interface is 18.104.22.168/30
IP on Lan connected to SXT1 IP interface is 10.0.0.1/29
IP on Lan connected to SXT2 IP interface is 10.0.0.4/29
Thanks in advance