Community discussions

MUM Europe 2020
 
flynno
Member Candidate
Member Candidate
Topic Author
Posts: 242
Joined: Wed Aug 27, 2014 8:11 pm

Routed Network

Sun Apr 15, 2018 10:25 pm

Hi Guys,

I have a question regarding setting up a routed network using two SXTs and two Routers.

Do I have to bridge both ether1 and wlan together or is there another way without bridging interfaces using IP routes?

SXT1
Wireless bridge mode
IP on Lan interface is 10.0.0.2/29
IP on Wlan interface is 178.168.0.1/30

SXT2
Wireless Station bridge mode
IP on Lan interface is 10.0.0.3/29
IP on Wlan interface is 178.168.0.2/30

Router 1
IP on Lan connected to SXT1 IP interface is 10.0.0.1/29
Loopback 10.255.255.1/32
OSPF setup
MPLS setup
VPLS setup
PPPoE setup

Router 2
IP on Lan connected to SXT2 IP interface is 10.0.0.4/29
Loopback 10.255.255.2/32
OSPF setup
MPLS setup
VPLS setup
PPPoE sertup


Thanks in advance
 
User avatar
mbfound
Member Candidate
Member Candidate
Posts: 134
Joined: Tue Jul 01, 2014 1:18 pm
Location: South Africa

Re: Routed Network

Mon Apr 16, 2018 12:08 pm

Guessing you're talking about bridging the ether and wlan on the SXT together? That's the way we have all our sites setup up so should work unless you set up OSPF on your SXTs as well.

Who is online

Users browsing this forum: No registered users and 19 guests