Community discussions

MUM Europe 2020
 
nostrax1
just joined
Topic Author
Posts: 4
Joined: Fri Apr 20, 2018 9:42 pm

Recommendations for optimization

Fri Apr 20, 2018 9:57 pm

Hello,

I operate a PtP-Link with 2 Dynadish AP, mode 5GHz AC only, 80MHz bandwidth dual chain, Wireless protocol NV2, distance between both devices is about 2km.

The Bandwith test from AP1 to AP2 gives me an average value of 170-175Mbps over TCP and about 260Mbps over UDP. I have already tested several frequencies, but the values remain approximately the same.

What do you think of these values, is this the maximum or is even more possible?
Do you have tips for further optimizations?

Thanks for your help!
 
antonsb
MikroTik Support
MikroTik Support
Posts: 198
Joined: Sun Jul 24, 2016 3:12 pm
Location: Riga, Latvia

Re: Recommendations for optimization

Fri Apr 20, 2018 10:07 pm

The Bandwith test from AP1 to AP2

There is Your problem - run traffic through the created link. Generating traffic takes a lot of resources.
 
nostrax1
just joined
Topic Author
Posts: 4
Joined: Fri Apr 20, 2018 9:42 pm

Re: Recommendations for optimization

Fri Apr 20, 2018 10:13 pm

I have tried with speedtest.net on side B, with 1Gbps cabled Client, max. values was around 130Mbps.
On side A, directy attached with 1Gbps on fiber Router, i have the maximum of line, around 155-160Mbps.
 
User avatar
mbfound
Member Candidate
Member Candidate
Posts: 134
Joined: Tue Jul 01, 2014 1:18 pm
Location: South Africa

Re: Recommendations for optimization

Sat Apr 21, 2018 10:29 pm

Try running A/N mode and check
 
nostrax1
just joined
Topic Author
Posts: 4
Joined: Fri Apr 20, 2018 9:42 pm

Re: Recommendations for optimization

Mon Apr 23, 2018 9:52 am

I have switched from NV2 to 802.11ac.
For this PtP-link over 2km this protocol gives me a little bit more speed and stability, every speedtest.net now is saturating
the maximum speed of fiber line with 160mbit/s.

Who is online

Users browsing this forum: No registered users and 22 guests