Very new to these MikroTik SXT access points and have been able to figure some things out on my own but running into a wall with a certain setup.
I had a question months ago and had some help regarding setting up 4 of these in two separate wireless bridges connecting 3 buildings together using this document https://wiki.mikrotik.com/wiki/Bridging ... s_with_SXT
Now, I'm trying to add another Mikrotik just recently installed (Total of 5 of these guys now) on new building with LOS to the main office AP and pointing it at the SXT that is located at the main office where the internet originates(Main Office AP is in Bridge mode). I've set this 5th Mikrotik we are just installing in "station bridge" mode just like the other Mikrotik AP that is bridged successfully to the main office. This new one would not connect and bridge like the other one is successfully doing.
With the setup from the wiki above, is there much different that needs to be done to have a second AP in bridge station mode pointing to the Bridge mode AP at the main office? It's on the same frequency, SSID, password, protocol, etc to communicate.
Considering the other 4 access points are forming two bridges in accordance with the above link. What settings would need to be done to this 5th one to connect as well and form a wireless bridge for this new building?
Hope I clarified enough!