Community discussions

MikroTik App
 
Armin
newbie
Topic Author
Posts: 25
Joined: Thu Mar 09, 2006 1:26 pm

Good signal, no data

Fri Jan 19, 2007 10:05 am

We have a problem with RB 532 and two atheros cards. There are three clients connected to one sector antenna. The signals are good (60 - 75), but there are some complaints that no data goes through. One ping out of 100.
What could be the problem.
 
Hellbound
Long time Member
Long time Member
Posts: 508
Joined: Tue Oct 26, 2004 11:21 am

Sat Jan 20, 2007 10:30 am

1. Intereference
2. Bad antenna
3. bad Cable
4. humid in connector

Perhaps faulty cards. bad Ack Setting and etc.

hope it helps.
 
Armin
newbie
Topic Author
Posts: 25
Joined: Thu Mar 09, 2006 1:26 pm

Mon Jan 22, 2007 8:20 pm

Is there a recommended ACK setting beside the default
 
mperdue
Member Candidate
Member Candidate
Posts: 290
Joined: Wed Jun 30, 2004 8:18 pm

Mon Jan 22, 2007 9:54 pm

I had this issue happen to me one time, and I thought it was a bad RB or cards... I switched out the cards and the problem was still there... On a suggestion from somone else on the boards, I /system reset the configuration and reprogramed it. Came right up and never had to do it again.
 
Hellbound
Long time Member
Long time Member
Posts: 508
Joined: Tue Oct 26, 2004 11:21 am

Tue Jan 23, 2007 4:28 am

ack should be set to dynamic if it is longer than 2000 meter.

Who is online

Users browsing this forum: No registered users and 12 guests