Hallo,

I´am Trying to connect my hAP Lite on an Existing WLAN Infrastruktur ( i have try it on two different enviroments) as station-pseudobridge, when i work with PSK no problems.
But when i use WPA2-EAP with username and passwort it not will not connect, he try it but cannot authenticate. On my Radiusserver i only see taht a guest try to connect.
The only Topic what i find to this is :
viewtopic.php?t=37879
but it is very old.

name="wlan2" mtu=1500 l2mtu=1600 mac-address=XXXXXXXX
arp=enabled interface-type=Atheros AR9888 mode=station-pseudobridge
ssid="XXXXX" frequency=5200 band=5ghz-a/n channel-width=20mhz
secondary-channel="" scan-list=default
wireless-protocol=nv2-nstreme-802.11 vlan-mode=no-tag vlan-id=1
wds-mode=disabled wds-default-bridge=none wds-ignore-ssid=no
bridge-mode=enabled default-authentication=yes default-forwarding=yes
default-ap-tx-limit=0 default-client-tx-limit=0 hide-ssid=no
security-profile=Radius compression=no


name="Radius" mode=dynamic-keys authentication-types=wpa2-eap
unicast-ciphers=aes-ccm group-ciphers=aes-ccm
supplicant-identity="MikroTik" eap-methods=peap tls-mode=no-certificates
tls-certificate=none mschapv2-username="XXXXXXXX"
mschapv2-password="XXXXXXX" static-algo-0=none static-key-0=""
static-algo-1=none static-key-1="" static-algo-2=none static-key-2=""
static-algo-3=none static-key-3="" static-transmit-key=key-0
static-sta-private-algo=none static-sta-private-key=""
radius-mac-authentication=no radius-mac-accounting=no
radius-eap-accounting=no interim-update=0s
radius-mac-format=XX:XX:XX:XX:XX:XX radius-mac-mode=as-username
radius-mac-caching=disabled group-key-update=5m
management-protection=disabled management-protection-key=""


Have anywone an idea ?

A guide on how to configure basic PEAP wireless client with RADIUS now is available in MikroTik Wiki.