just setup a new mik based network.
hw: hex poe + 2 cap ac
- capsman at remote site (CHR)
all wired connection are ok. (even connect to cap ac eth2, will get ip address from dhcp server, from hex)
wireless: windows client failed
2. all windows client failed to get ip address. (capsman show it's success connected). tried multiple windows combonation(thinkpad & dell notebook/pc, mecury/edup usb wifi thumb, win 7 x86/x64, win 10 x64).
all failed to get ip address.
when this failes, not dhcp info was logged. (if no dhcp relay set)
3. tried to set dhcp relay on hex and cap, then get error like:
20:05:35 dhcp,debug received inform from 3C:97:0E:46:00:01 with unknown giaddr 172.20.1.11
20:05:35 dhcp,debug received inform from 3C:97:0E:46:00:01 with unknown giaddr 172.20.1.11
hex dhcp server config
on cap ac/ip pool
add name=default-dhcp ranges=172.20.1.100-172.20.1.130
/ip dhcp-server
add add-arp=yes address-pool=default-dhcp always-broadcast=yes disabled=no \
insert-queue-before=bottom interface=bridge name=defconf src-address=\
172.20.1.1
/ip dhcp-relay
add dhcp-server=172.20.1.1 disabled=no interface=bridge local-address=\
255.255.255.255 name=relay1
/ip dhcp-server lease
add address=172.20.1.100 always-broadcast=yes mac-address=48:8A:D2:80:67:F1
/ip dhcp-server network
add address=172.20.1.0/24 comment=defconf dns-server=172.20.1.1 gateway=\
172.20.1.1 netmask=24 ntp-server=172.20.1.1
any advice are welcome. thankyou./ip dhcp-relay
add dhcp-server=172.20.1.1 disabled=no interface=ether1 name=relay1
update 1:
try set local capsman on hex (with dhcp server on it), windows client still failed.
updatet 2:
try set up local auth wifi on capac , with dhcp server on hex. no luck.