Practically same post was answered just couple of days ago:
viewtopic.php?f=7&t=137044&p=675540#p675540
Do not tell me that it is just coincidence, that first sentence and last sentence are totally same including grammar mistake.
Can you tell us what are you trying to achieve by sending same post again?
Hi.
The reason for that is my difficulty to express myself in english. Before I ask my question I did a research on the forum, and saw a question that was almost the same problem, but a little different and the answers didn't help me. In the computer I was using didn't have a "Spell Checker", so I changed some things and used the part of the text that explained my problem.
I'm sorry if I was wrong in doing that, but I am still having the problem with my routerboard. If someone can help me I will be very grateful.
Exported config: # jul/24/2018 18:52:01 by RouterOS 6.27
# software id = NIGM-4P0H
#
/interface bridge
add admin-mac=D4:CA:6D:D4:0D:35 auto-mac=no name=bridge-local
/interface wireless
set [ find default-name=wlan1 ] band=2ghz-b/g/n channel-width=\
20/40mhz-ht-above disabled=no distance=indoors frequency=auto \
ht-supported-mcs="mcs-0,mcs-1,mcs-2,mcs-3,mcs-4,mcs-5,mcs-6,mcs-7,mcs-8,mc\
s-9,mcs-10,mcs-11,mcs-12,mcs-13,mcs-14,mcs-15" l2mtu=2290 mode=ap-bridge \
ssid=TL2 wireless-protocol=802.11
/interface ethernet
set [ find default-name=ether1 ] name=ether1-gateway
set [ find default-name=ether2 ] name=ether2-master-local
set [ find default-name=ether3 ] master-port=ether2-master-local name=\
ether3-slave-local
set [ find default-name=ether4 ] master-port=ether2-master-local name=\
ether4-slave-local
set [ find default-name=ether5 ] master-port=ether2-master-local name=\
ether5-slave-local
/ip neighbor discovery
set ether1-gateway discover=no
/interface wireless security-profiles
set [ find default=yes ] authentication-types=wpa2-psk mode=dynamic-keys \
wpa2-pre-shared-key=697877-m
/ip pool
add name=default-dhcp ranges=192.168.88.10-192.168.88.254
/ip dhcp-server
add address-pool=default-dhcp disabled=no interface=bridge-local name=default
/interface bridge port
add bridge=bridge-local interface=ether2-master-local
add bridge=bridge-local interface=wlan1
/ip address
add address=192.168.88.1/24 comment="default configuration" interface=\
bridge-local network=192.168.88.0
/ip dhcp-client
add comment="default configuration" dhcp-options=hostname,clientid disabled=\
no interface=ether1-gateway
/ip dhcp-server network
add address=192.168.88.0/24 comment="default configuration" gateway=\
192.168.88.1
/ip dns
set allow-remote-requests=yes
/ip dns static
add address=192.168.88.1 name=router
/ip firewall filter
add chain=input comment="default configuration" protocol=icmp
add chain=input comment="default configuration" connection-state=\
established,related
add action=drop chain=input comment="default configuration" disabled=yes \
in-interface=ether1-gateway
add chain=forward comment="default configuration" connection-state=\
established,related
add action=drop chain=forward comment="default configuration" \
connection-state=invalid
add action=drop chain=forward comment="default configuration" \
connection-nat-state=!dstnat connection-state=new in-interface=\
ether1-gateway
/ip firewall nat
add action=masquerade chain=srcnat comment="default configuration" \
out-interface=ether1-gateway
/system clock
set time-zone-name=America/Sao_Paulo
/system leds
set 0 interface=wlan1
/tool mac-server
set [ find default=yes ] disabled=yes
add interface=ether2-master-local
add interface=ether3-slave-local
add interface=ether4-slave-local
add interface=ether5-slave-local
add interface=wlan1
add interface=bridge-local
/tool mac-server mac-winbox
set [ find default=yes ] disabled=yes
add interface=ether2-master-local
add interface=ether3-slave-local
add interface=ether4-slave-local
add interface=ether5-slave-local
add interface=wlan1
add interface=bridge-local