No, you need two radios.Can it be done with a single band device? I understand it would be transmitting and receiving on the same channel.
/interface wireless
###BASIC WLAN1 SETUP. BOGUS SECURITY PROFILE TO PREVENT ROUTER FROM CONNECTING TO ANY "OPEN" WI-FI. NOTE ALSO EMPTY SSID.
set [ find default-name=wlan1 ] antenna-gain=1 band=2ghz-onlyn country=canada \
default-forwarding=no disabled=no distance=indoors frequency=auto \
frequency-mode=regulatory-domain radio-name=mAP-Alain security-profile=\
Bidon ssid="" wireless-protocol=802.11
###VAP HERE. VAP BROADCASTS HOME SSID WITH SAME SECURITY PROFILE. WE DON'T HAVE TO RECONFIGURE OUR DEVICES WHILE ON THE ROAD.
add disabled=no keepalive-frames=disabled mac-address=4E:5E:0C:6C:64:0C \
master-interface=wlan1 multicast-buffering=disabled name=[b]wlan2 [/b]\
security-profile=MAISON ssid=DSWLAN wds-cost-range=0 wds-default-cost=0 \
wps-mode=disabled
###CONNECT LISTS TO SPECIFY SSIDs TO CONNECT AND SECURITY PROFILES TO USE
/interface wireless connect-list
add comment="Park Lane Inn & Suites" interface=wlan1 security-profile=default ssid=Park_Lane_Guest_WiFi wireless-protocol=802.11
add comment="Country Inn Lexington VA" interface=wlan1 security-profile=default ssid=country wireless-protocol=802.11
add comment="Grand Times Hotel" interface=wlan1 security-profile=times ssid=Times wireless-protocol=802.11
ETC.
###
###VAP AND ONE ETHERNET ARE ON LAN BRIDGE. PRETTY STANDARD SETUP FROM THERE
###
/interface bridge
add admin-mac=4C:5E:0C:6C:64:0B auto-mac=no name=LAN
/interface bridge port
add bridge=LAN interface=ether2
add bridge=LAN interface=wlan2
/ip address
add address=192.168.255.1/24 comment=LAN interface=LAN network=192.168.255.0
/ip dhcp-client
add comment="default configuration" default-route-distance=5 dhcp-options= hostname,clientid disabled=no interface=wlan1
add comment="default configuration" default-route-distance=5 dhcp-options=hostname,clientid disabled=no interface=ether1
/ip pool
add name=pool-LAN ranges=192.168.255.10-192.168.255.254
/ip dhcp-server
add address-pool=pool-LAN disabled=no interface=LAN name=dhcp-LAN
/ip dhcp-server network
add address=192.168.255.0/24 comment=LAN dns-server=192.168.255.1 gateway=192.168.255.1
###
FIREWAL FILTERS, NAT, ROUTING AND OTHER PARAMETERS OMITTED FOR SIMPLICITY'S SAKE
###
I also benefit from a firewall as I don't trust public hotspots.
security-profile=Bidon
I also benefit from a firewall as I don't trust public hotspots.
Thanks. I will test it out.
All time I am connected to a public WIFI, I always user L2TP/IPSEC to my MT at home. Do not trust any open site.
How do I setup the security profile?Code: Select allsecurity-profile=Bidon