Good Day Everyone
Need help with improving the throughput on this board's wireless. Currently, next to it (2m radius), people get maximum 34mbps download and 15mbps upload. One device at a time. After 10 meters one barely get 1mbps download. This test has been conducted in high interference areas (-98 noise) and low interference (-113 noise). Same results. Please see the current config below. I work as the technical oak in a big distributor, we get a lot of complaints about the wireless performance of the RB2011, thus me and my team set out to test the complaints with 7 RB2011's. Same results.
Topology are as follow:
1000mbps business fiber line coming in. The line going into Port1 under a bridge setup. Using 9 different phones to test and 4 laptops. The bridge is set up with Fast Forward.
Here is a basic wireless setup that we use to test.
# jan/01/2002 01:52:49 by RouterOS 6.43
# model = 2011UiAS-2HnD
/interface bridge
add name=bridge1
/interface wireless security-profiles
set [ find default=yes ] supplicant-identity=MikroTik
add authentication-types=wpa-psk,wpa2-psk eap-methods="" \
management-protection=allowed mode=dynamic-keys name=profile1 \
supplicant-identity="" wpa-pre-shared-key=Nullvoid_Death \
wpa2-pre-shared-key=Nullvoid_Death
/interface wireless
set [ find default-name=wlan1 ] band=2ghz-onlyn country="south africa" \
disabled=no mode=ap-bridge security-profile=profile1 ssid=Redavour \
tx-power=27 tx-power-mode=all-rates-fixed wireless-protocol=802.11
/interface bridge port
add bridge=bridge1 interface=all trusted=yes
/ip dns
set allow-remote-requests=yes
/ip firewall filter
add action=fasttrack-connection chain=forward connection-state=\
established,related
add action=accept chain=forward connection-state=established,related
/system routerboard settings
set silent-boot=no