Hi

Im fairly new to this byt the system has been working for quite some time.

After my internet provider hade som problems in my city I had to reboot my Router.

After this i do get internet via Ethernet cable but my Waps dont give me access to internet via WiFi.

Can anyone please help.

Setup is

RB-750
Wap
Wap

And from terminal i copyed:










MMM MMM KKK TTTTTTTTTTT KKK
MMMM MMMM KKK TTTTTTTTTTT KKK
MMM MMMM MMM III KKK KKK RRRRRR OOOOOO TTT III KKK KKK
MMM MM MMM III KKKKK RRR RRR OOO OOO TTT III KKKKK
MMM MMM III KKK KKK RRRRRR OOO OOO TTT III KKK KKK
MMM MMM III KKK KKK RRR RRR OOOOOO TTT III KKK KKK

MikroTik RouterOS 6.43 (c) 1999-2018 http://www.mikrotik.com/

[?] Gives the list of available commands
command [?] Gives help on the command and list of arguments

[Tab] Completes the command/word. If the input is ambiguous,
a second [Tab] gives possible options

/ Move up to base level
.. Move up one level
/command Use command at the base level
jan/02/1970 00:00:13 system,error,critical router was rebooted without proper shut
down
oct/05/2018 21:58:09 system,error,critical router was rebooted without proper shut
down
oct/05/2018 22:32:30 system,error,critical login failure for user from 192.168.88
.244 via winbox
[admin@MikroTik] > /Export
expected command name (line 1 column 2)
[admin@MikroTik] > /export
# oct/05/2018 22:33:26 by RouterOS 6.43
# software id = Q5NH-78BL
#
# model = RouterBOARD 750G r2
# serial number = 5C1305CF0F03
/interface bridge
add admin-mac=E4:8D:8C:AF:F4:C8 auto-mac=no comment=defconf name=bridge
/interface list
add comment=defconf name=WAN
add comment=defconf name=LAN
/interface wireless security-profiles
set [ find default=yes ] supplicant-identity=MikroTik
/ip pool
add name=default-dhcp ranges=192.168.88.10-192.168.88.254
/ip dhcp-server
add address-pool=default-dhcp disabled=no interface=bridge name=defconf
/caps-man manager interface
set [ find default=yes ] forbid=yes
add disabled=no interface=bridge
/interface bridge port
add bridge=bridge comment=defconf interface=ether2
add bridge=bridge comment=defconf interface=ether3
add bridge=bridge comment=defconf interface=ether4
add bridge=bridge comment=defconf interface=ether5
/ip neighbor discovery-settings
set discover-interface-list=LAN
/interface list member
add comment=defconf interface=bridge list=LAN
add comment=defconf interface=ether1 list=WAN
/ip address
add address=192.168.88.1/24 comment=defconf interface=bridge network=\
192.168.88.0
/ip dhcp-client
add comment=defconf dhcp-options=hostname,clientid disabled=no interface=ether1
/ip dhcp-server network
add address=192.168.88.0/24 comment=defconf gateway=192.168.88.1
/ip dns
set allow-remote-requests=yes
/ip dns static
add address=192.168.88.1 name=router.lan
/ip firewall filter
add action=accept chain=input comment=\
"defconf: accept established,related,untracked" connection-state=\
established,related,untracked
add action=drop chain=input comment="defconf: drop invalid" connection-state=\
invalid
add action=accept chain=input comment="defconf: accept ICMP" protocol=icmp
add action=drop chain=input comment="defconf: drop all not coming from LAN" \
in-interface-list=!LAN
add action=accept chain=forward comment="defconf: accept in ipsec policy" \
ipsec-policy=in,ipsec
add action=accept chain=forward comment="defconf: accept out ipsec policy" \
ipsec-policy=out,ipsec
add action=fasttrack-connection chain=forward comment="defconf: fasttrack" \
connection-state=established,related
add action=accept chain=forward comment=\
"defconf: accept established,related, untracked" connection-state=\
established,related,untracked
add action=drop chain=forward comment="defconf: drop invalid" connection-state=\
invalid
add action=drop chain=forward comment=\
"defconf: drop all from WAN not DSTNATed" connection-nat-state=!dstnat \
connection-state=new in-interface-list=WAN
/ip firewall nat
add action=masquerade chain=srcnat comment="defconf: masquerade" ipsec-policy=\
out,none out-interface-list=WAN
/ipv6 firewall address-list
add address=::/128 comment="defconf: unspecified address" list=bad_ipv6
add address=::1/128 comment="defconf: lo" list=bad_ipv6
add address=fec0::/10 comment="defconf: site-local" list=bad_ipv6
add address=::ffff:0.0.0.0/96 comment="defconf: ipv4-mapped" list=bad_ipv6
add address=::/96 comment="defconf: ipv4 compat" list=bad_ipv6
add address=100::/64 comment="defconf: discard only " list=bad_ipv6
add address=2001:db8::/32 comment="defconf: documentation" list=bad_ipv6
add address=2001:10::/28 comment="defconf: ORCHID" list=bad_ipv6
add address=3ffe::/16 comment="defconf: 6bone" list=bad_ipv6
add address=::224.0.0.0/100 comment="defconf: other" list=bad_ipv6
add address=::127.0.0.0/104 comment="defconf: other" list=bad_ipv6
add address=::/104 comment="defconf: other" list=bad_ipv6
add address=::255.0.0.0/104 comment="defconf: other" list=bad_ipv6
/ipv6 firewall filter
add action=accept chain=input comment=\
"defconf: accept established,related,untracked" connection-state=\
established,related,untracked
add action=drop chain=input comment="defconf: drop invalid" connection-state=\
invalid
add action=accept chain=input comment="defconf: accept ICMPv6" protocol=icmpv6
add action=accept chain=input comment="defconf: accept UDP traceroute" port=\
33434-33534 protocol=udp
add action=accept chain=input comment=\
"defconf: accept DHCPv6-Client prefix delegation." dst-port=546 protocol=\
udp src-address=fe80::/16
add action=accept chain=input comment="defconf: accept IKE" dst-port=500,4500 \
protocol=udp
add action=accept chain=input comment="defconf: accept ipsec AH" protocol=\
ipsec-ah
add action=accept chain=input comment="defconf: accept ipsec ESP" protocol=\
ipsec-esp
add action=accept chain=input comment=\
"defconf: accept all that matches ipsec policy" ipsec-policy=in,ipsec
add action=drop chain=input comment=\
"defconf: drop everything else not coming from LAN" in-interface-list=!LAN
add action=accept chain=forward comment=\
"defconf: accept established,related,untracked" connection-state=\
established,related,untracked
add action=drop chain=forward comment="defconf: drop invalid" connection-state=\
invalid
add action=drop chain=forward comment="defconf: drop packets with bad src ipv6" \
src-address-list=bad_ipv6
add action=drop chain=forward comment="defconf: drop packets with bad dst ipv6" \
dst-address-list=bad_ipv6
add action=drop chain=forward comment="defconf: rfc4890 drop hop-limit=1" \
hop-limit=equal:1 protocol=icmpv6
add action=accept chain=forward comment="defconf: accept ICMPv6" protocol=\
icmpv6
add action=accept chain=forward comment="defconf: accept HIP" protocol=139
add action=accept chain=forward comment="defconf: accept IKE" dst-port=500,4500 \
protocol=udp
add action=accept chain=forward comment="defconf: accept ipsec AH" protocol=\
ipsec-ah
add action=accept chain=forward comment="defconf: accept ipsec ESP" protocol=\
ipsec-esp
add action=accept chain=forward comment=\
"defconf: accept all that matches ipsec policy" ipsec-policy=in,ipsec
add action=drop chain=forward comment=\
"defconf: drop everything else not coming from LAN" in-interface-list=!LAN
/system clock
set time-zone-name=Europe/Stockholm
/system routerboard settings
set silent-boot=no
/tool mac-server
set allowed-interface-list=LAN
/tool mac-server mac-winbox
set allowed-interface-list=LAN
[admin@MikroTik] >

WiFi on your wap is not statically configured but it seems to be managed by CapsMan. Is the wap owned and managed by your ISP?
Check output of command /interface print to see if wlan is configured dynamically. If wap is managed by your ISP, then you'll have to deal with them. If wap is your responsibility, you'll have to configure wireless.

Ok I will check this!

And I am the owner of the Waps and Hex.

But as I say, I think its hard to setup right.

Tried a new Youtube video and made a new setup. Does this look better?

[admin@CapsMan] > export
# jan/02/1970 00:28:23 by RouterOS 6.43
# software id = Q5NH-78BL
#
# model = RouterBOARD 750G r2
# serial number = 5C1305CF0F03
/interface bridge
add fast-forward=no name=bridge1
add fast-forward=no name=bridge_Cap
add fast-forward=no name=bridge_Cap2
/caps-man configuration
add channel.band=2ghz-b/g/n country=sweden datapath.bridge=bridge_Cap mode=ap \
name=config_1 security.authentication-types=wpa-psk,wpa2-psk \
security.encryption=aes-ccm,tkip security.passphrase=06906788 ssid=\
EkstrandsWiFi
/caps-man interface
add configuration=config_1 disabled=no l2mtu=1600 mac-address=E4:8D:8C:CE:DE:D9 \
master-interface=none name=cap1 radio-mac=E4:8D:8C:CE:DE:D9 radio-name=\
E48D8CCEDED9
add configuration=config_1 disabled=no l2mtu=1600 mac-address=E4:8D:8C:CB:84:B9 \
master-interface=none name=cap2 radio-mac=E4:8D:8C:CB:84:B9 radio-name=\
E48D8CCB84B9
/interface list
add name=WAN
add name=LAN
/interface wireless security-profiles
set [ find default=yes ] supplicant-identity=MikroTik
/caps-man manager
set enabled=yes
/interface bridge port
add bridge=bridge_Cap interface=ether2 trusted=yes
add bridge=bridge_Cap interface=ether1 trusted=yes
add bridge=bridge_Cap interface=ether3 trusted=yes
/interface list member
add interface=ether1 list=WAN
add interface=ether2 list=LAN
add interface=ether3 list=LAN
add interface=ether4 list=LAN
add interface=ether5 list=LAN
/ip address
add address=10.10.1.35/24 interface=ether2 network=10.10.1.0
add address=10.10.1.35/24 interface=ether1 network=10.10.1.0
/system identity
set name=CapsMan
/system routerboard settings
set silent-boot=no
[admin@CapsMan] >