Community discussions

just joined
Topic Author
Posts: 1
Joined: Mon Dec 03, 2018 5:06 am

Capsman anf firmware 6.43.4

Mon Dec 03, 2018 5:42 am

Hi, all.

After upgrading firmware to 6.43.4 Capsman controller can't get parametres from itself.
Wireless Tables->Wifi Interfaces I see -- managed by CAPsMAN and no any parametres.

In filter rule

add action=accept chain=output dst-address= port=5246,5247 protocol=\
udp src-address=
add action=accept chain=input dst-address= port=5246,5247 protocol=udp \

In wifi interfaces

/interface wireless cap

set bridge=bridge-local caps-man-addresses= discovery-interfaces=\
bridge-local enabled=yes interfaces=wlan1

In log

13:26:36 caps,info CAP failed to join MikroTik (::ffff:
13:26:43 caps,info CAP selected CAPsMAN MikroTik (::ffff:
13:27:03 caps,info CAP connect to MikroTik (::ffff: failed: timeout

Before upgrading from 6.42.6 to 6.43.4 i have no such problem with controller. It works like cap and correctly recieved all parametres from itself

Is it problem in 6.43.4 or somewhere else?
Frequent Visitor
Frequent Visitor
Posts: 88
Joined: Thu Jun 21, 2018 9:29 pm

Re: Capsman anf firmware 6.43.4

Tue Dec 04, 2018 10:17 pm

It's highly unlikely that your dst-address= rule will match traffic to Try to use a dst-address-type=local src-address-type=local rule like documented at ... in_CAPsMAN

Who is online

Users browsing this forum: No registered users and 26 guests