Community discussions

 
KristianJS
just joined
Topic Author
Posts: 1
Joined: Wed Jan 09, 2019 8:32 pm

P2P Connectivity issues

Wed Jan 09, 2019 8:53 pm

Hey, I could really use some insight into a problem with a few of my wireless links.

One of my sites is connected to the main office via a 8km link using 2 dynadish antennas, from there another point to point using LHG5ac to bring the network to the router and then finally sends the signal out to 3 seperate sites one uses a dedicated link with LHGs and the other 2 use a horn and have a LHG at their end.

My question is about interference, I have made sure that all links are using appropriate wireless channels that dont interfere and also looked at the access points wireless channels but i still see TX/RX CCQ dropping to 55% on the 3 links that leave the router. The antennas are all mounted in close proximity on a telephone pole that has a 3 phase power transformer less than a few feet away.

Could the power transformer be the culprit of the low CCQ?
You do not have the required permissions to view the files attached to this post.

Who is online

Users browsing this forum: Ohforf and 31 guests