Community discussions

 
omarraza
just joined
Topic Author
Posts: 20
Joined: Sun Jan 13, 2019 12:21 am

point to point low throughput!

Fri Feb 22, 2019 9:31 pm

Hello,
I have one mikrotik sxt5 5HPnDr2 as AP from Home with a nanosation5 at the shop, I shared home internet via the Mikrotik to shop using PTP.
at Home when I test the internet the speed is 35Mbps , ping is 18 but at the shop when I test the Internet maximum speed is 14Mbps ping is 18 which shop's nanostation (signal is -30dBm ,Noise Floor is -80dBm and CCQ is 98% ) both are very high from floor and the distance between those nearly is 350m . and no building or any other thing between those. you can see any devices from above, for example from the shop I can see clearly home's nanostation.

please help me and explain to me why the speed is 14Mbps when the signal is -30dBm it's not good signal!? near my both devices have 2 small internet Tower and 1 cellular tower, does it affect my PTP internet quality?
how to solve this problem and get the best result.

Thanks.
 
omarraza
just joined
Topic Author
Posts: 20
Joined: Sun Jan 13, 2019 12:21 am

Re: point to point low throughput!

Sat Feb 23, 2019 1:31 am

please help.
 
2frogs
Long time Member
Long time Member
Posts: 534
Joined: Fri Dec 03, 2010 1:38 am

Re: point to point low throughput!

Sat Feb 23, 2019 2:43 am

-30 is too strong of a signal. Reduce the power on both to maintain a -50 on both. 35Mbps is about the max you can expect from the NanoStation5.
 
omarraza
just joined
Topic Author
Posts: 20
Joined: Sun Jan 13, 2019 12:21 am

Re: point to point low throughput!

Sun Feb 24, 2019 12:44 am

I did it, but the result is the same 14Mbps!
Please help.
 
User avatar
honzam
Forum Guru
Forum Guru
Posts: 2285
Joined: Wed Feb 27, 2008 10:27 pm
Location: Czech Republic

Re: point to point low throughput!

Sun Feb 24, 2019 9:12 pm

What datarates you have in registration table? And other values?
LAN, FTTx, Wireless. ISP operator
 
omarraza
just joined
Topic Author
Posts: 20
Joined: Sun Jan 13, 2019 12:21 am

Re: point to point low throughput!

Wed Feb 27, 2019 1:31 am

download a simple file it's througput speed is 1.9MB from the destination, but if i download the same file from the source the result near 4.5MB !!?
which I have a very good signal.!
 
omarraza
just joined
Topic Author
Posts: 20
Joined: Sun Jan 13, 2019 12:21 am

Re: point to point low throughput!

Thu Feb 28, 2019 2:07 pm

this is my station throughput speed!
Image
 
sergesa
just joined
Posts: 7
Joined: Thu Aug 09, 2018 7:16 pm

Re: point to point low throughput!

Sun Mar 10, 2019 10:08 am

Show wireless settings and signal . -80 noise too high, 36Mbps too low for signaling speed. Change frequency

Who is online

Users browsing this forum: No registered users and 9 guests