Hello,
We have different networks setup in our lab environment on the B42 frequency. I would like to run a scan to see all available networks but nothing is showing up after multiple minutes (not in the interface or the terminal).
Is there something specific I should be doing?
I tested the latest stable version (6.44) and the latest testing release (6.45beta6). I updated my routerboard as well and updated the modem to the latest firmware.
The board has a sim card inserted but is not connected to a network as it's being denied trying to connect to the wrong network. So I would like to lock it to a certain cell but I'm unable to get that info through the scanner.
The modem is a R11-4G (with V007).