I read several posts on the subject but none with solution apparently.
in several cities and different noise scenarios I see that the MantBox has some problem (we use 15 and 19) With optimal signals (between -50 to -70) we get really low CCQ (5 to 30%) so the throughput is collapses
We use Ap only AC, Nv2, for the moment at 20mhz because the performance is low. Are there ways to improve this?
The channel is at 0% of use and the snooper does not find stations either, so the 5300 channel is good. In 5800 it gets worse.
Code: Select all
/interface wireless set [ find default-name=wlan1 ] band=5ghz-onlyac country=argentina \ default-forwarding=no disabled=no disconnect-timeout=5s frequency=5300 \ frequency-mode=superchannel hide-ssid=yes mode=ap-bridge nv2-cell-radius=10 \ nv2-preshared-key=wpm18 radio-name=AP_PM_NORTE security-profile=SEGURIDAD \ ssid=AP_PM_NORTE tdma-period-size=auto wds-default-bridge=bridge1 wds-mode=\ dynamic wireless-protocol=nv2