Community discussions

 
Knockoutman
just joined
Topic Author
Posts: 3
Joined: Sun Mar 17, 2019 3:34 am

How to setup redundant radio link?

Sun Mar 17, 2019 3:49 am

Hi
I'm trying to make a redundant radio link to work, but at the moment the speed is very low, setup is like below:

radio1 192.168.1.200----------------------------------------------------------------------------------radio1 192.168.1.201
MASTERS------------HEX Mikrotik192.168.1.10------------HEX Mircrotik 192.168.1.11-----------------SLAVES
radio2 192.168.1.202----------------------------------------------------------------------------------radio2 192.168.1.203

so if an antenna on one side fails the other should activate, at the moment the link look weak with silly speeds of ~20mbps, wasn't working at all but it began working after I setup VLAN, if anyone could help me would be great.

Regards,
 
User avatar
AminYounessi
Trainer
Trainer
Posts: 53
Joined: Wed Nov 23, 2016 7:39 am

Re: How to setup redundant radio link?

Tue Mar 19, 2019 2:40 pm

Hi,

You can use other MikroTik router behind each side of the link and connect 2 radios to that router on each side and you can use static route with different administrative distance to other side of the link or you can use the "interface bonding" option to bond two wireless link together, another solution is to use the cisco switch behind them and use ether channel.
You have many option.
 
Knockoutman
just joined
Topic Author
Posts: 3
Joined: Sun Mar 17, 2019 3:34 am

Re: How to setup redundant radio link?

Tue Mar 19, 2019 10:07 pm

Hi, I already tried interface bonding and also create VLANs on the WANs ports but speed is limited to 100Mbps.
 
mistry7
Forum Guru
Forum Guru
Posts: 1244
Joined: Tue Oct 13, 2009 11:57 am
Location: Germany

Re: How to setup redundant radio link?

Tue Mar 19, 2019 11:04 pm

 
Knockoutman
just joined
Topic Author
Posts: 3
Joined: Sun Mar 17, 2019 3:34 am

Re: How to setup redundant radio link?

Tue Mar 19, 2019 11:18 pm

Nice, will try and let you know, many thanks.

Who is online

Users browsing this forum: No registered users and 23 guests