Community discussions

 
tgiannak
just joined
Topic Author
Posts: 9
Joined: Thu Nov 05, 2015 10:28 am

RB433

Sat Apr 06, 2019 1:57 pm

Hello,

before i deploy i want to ask you a question,

i have one groove one one side and on the other side a rb433 with a MikroTik R52nM 802.11a/b/g/n dual band miniPCI card , and i want to make a ptp link! the distance is 50 meters line of sight no big deal..the thing im worried is that the rb433 has 300mhz cpu...how much bandwidth can this cpu take?? on the other side (groove side) is a vdsl 50mbps, will i have this speed ??

groove and rb433 will bridging connection

thanks
 
r00t
Member Candidate
Member Candidate
Posts: 156
Joined: Tue Nov 28, 2017 2:14 am

Re: RB433

Sat Apr 06, 2019 2:48 pm

If you only do the bridging, no CPU will be a bottleneck. Both groove and rb433 can do more than 50mbit/s in a bridge setup like this.
 
tgiannak
just joined
Topic Author
Posts: 9
Joined: Thu Nov 05, 2015 10:28 am

Re: RB433

Sat Apr 06, 2019 6:32 pm

If you only do the bridging, no CPU will be a bottleneck. Both groove and rb433 can do more than 50mbit/s in a bridge setup like this.
thanks for your quick answer ! now up in the roof for deployment!!

Who is online

Users browsing this forum: No registered users and 24 guests