Hi,
I've got 6 of the WAP 60GX3 radios (License level 4). i was wondering if I can set them up as a mesh network? If yes, could anyone please let me know how to configure it. I couldn't find the WDS mode to configure it as a mesh. Any help will be of great help.
thanks
rks
Re: WAP 60GX3 Mesh Network support?
so far only ap-sta and bridge-sta links are supported.
once the first terragraph phy compatible units come out - you will have support for arbitrary ap-ap links and therefore a true mess will be possible.
until then you need to manually configure your devices as ap or station, and sometimes place
more of them ot a site with wired interconnection to have a mesh like behaviour.
the. you can decide to run rstp/mstp and have it as a l2 network or do routing over the p2p wireless links.
i did a presentation about such an implementation at the budapest MUM this year. i will add soon english subtitles to it as it is right now in hungarian.
once the first terragraph phy compatible units come out - you will have support for arbitrary ap-ap links and therefore a true mess will be possible.
until then you need to manually configure your devices as ap or station, and sometimes place
more of them ot a site with wired interconnection to have a mesh like behaviour.
the. you can decide to run rstp/mstp and have it as a l2 network or do routing over the p2p wireless links.
i did a presentation about such an implementation at the budapest MUM this year. i will add soon english subtitles to it as it is right now in hungarian.
-
-
cassclaywireless
just joined
- Posts: 1
- Joined:
Re: WAP 60GX3 Mesh Network support?
I would be very interested in that presentation, I have an 80 home development this would be ideal for.