Community discussions

MikroTik App
 
tanel
Trainer
Trainer
Topic Author
Posts: 3
Joined: Fri Apr 07, 2017 9:35 am

2.4G clients not able to join disconnected, received deauth: sending station leaving (8)

Tue Aug 06, 2019 4:16 pm

On 2.4G clients try to join the AP and the log shows only

15:57:28 wireless,debug wlan1: 60:AF:6D:46:88:61 attempts to associate
15:57:28 wireless,debug wlan1: 60:AF:6D:46:88:61 in local ACL, accept
15:57:28 wireless,info 60:AF:6D:46:88:61@wlan1: connected
15:57:28 wireless,info 60:AF:6D:46:88:61@wlan1: disconnected, received deauth: sending station leaving (8)
15:57:31 wireless,debug wlan1: 60:AF:6D:46:88:61 attempts to associate
15:57:31 wireless,debug wlan1: 60:AF:6D:46:88:61 in local ACL, accept
15:57:31 wireless,info 60:AF:6D:46:88:61@wlan1: connected
15:57:31 wireless,info 60:AF:6D:46:88:61@wlan1: disconnected, received deauth: sending station leaving (8)

was using hAP ac lite on latest version (6.45.3) and also latest bugfix (6.44.5) and corresponding firmware- still nothing.
When looking from the air sniffer it looks as MT is sending the deauth packets himself. On the same time while testing with some other random access points from other vendors - no issues so also nobody just hammering the deauth packets.

After playing a little bit this problem started to occur also on 5Ghz band but after reset 5G became stable again.

So any help or hints appreciated
 
slav0nic
just joined
Posts: 9
Joined: Sun Oct 26, 2014 10:14 am

Re: 2.4G clients not able to join disconnected, received deauth: sending station leaving (8)

Thu Aug 08, 2019 2:53 pm

here is many topics like this (viewtopic.php?f=7&t=85033 for example) without official answer =\
 
User avatar
krafg
Forum Guru
Forum Guru
Posts: 1020
Joined: Sun Jun 28, 2015 7:36 pm

Re: 2.4G clients not able to join disconnected, received deauth: sending station leaving (8)

Sun Aug 11, 2019 8:18 am

It's very common situation using 802.11 with 2.4Ghz. Until today, no solution for this.

Regards.
 
tanel
Trainer
Trainer
Topic Author
Posts: 3
Joined: Fri Apr 07, 2017 9:35 am

Re: 2.4G clients not able to join disconnected, received deauth: sending station leaving (8)

Tue Aug 13, 2019 11:59 am

@MikroTik do you have any solution for this ? clients report that this even occurs with default config and all the other AP-s tested (ubi, tplink, cisco,meraki) work in the very same location and clients so very hard to blame it on something else- would need at least some hint which software version / firmware version works.
 
viesturs
MikroTik Support
MikroTik Support
Posts: 8
Joined: Tue Nov 29, 2016 11:16 am
Location: Riga, Latvia

Re: 2.4G clients not able to join disconnected, received deauth: sending station leaving (8)

Tue Aug 13, 2019 1:46 pm

Please send us the supout.rif file right after the issue appears and the packet capture to support@mikrotik.com.
 
ppihus
just joined
Posts: 12
Joined: Wed Sep 28, 2016 4:24 pm

Re: 2.4G clients not able to join disconnected, received deauth: sending station leaving (8)

Wed Aug 14, 2019 12:30 pm

RB2011UAS-2HnD, just made reset + default conf. Issue remains.
Sending supout.rif to support@mikrotik.com now.

Who is online

Users browsing this forum: loloski, ret411 and 20 guests