Community discussions

MUM Europe 2020
 
ropeba
Member Candidate
Member Candidate
Topic Author
Posts: 220
Joined: Sat Jul 29, 2006 4:13 pm

Best miniPCI for high noise

Fri Apr 20, 2007 10:50 pm

Who have experience with equipment in high noise region? Right now I'm in very bad situation with CM9 on 2,4 GHz, becouse in my region there's about 30-40 active AP's on aproximately every 500m. (2-3 APs on each channel)
 
Chipi
Frequent Visitor
Frequent Visitor
Posts: 57
Joined: Thu Nov 24, 2005 12:02 am

Sat Apr 21, 2007 1:35 pm

Prism Chipset culd run better than atheros in this situation...

For Example Senao NL 2511+ (802.11b)

Regards
----------{Microcom Argentina SA}----------
Distribuidor Mayorista MIKROTIK en Argentina

http://www.microcom.com.ar
 
TomKolb
newbie
Posts: 32
Joined: Thu Jul 14, 2005 3:51 am

Sat Apr 21, 2007 3:30 pm

I would install cavity filerss to eleminate youir receiver having to deal with the noise out side of the channel of interest. Ore your customers reregistering rapidly?
 
ropeba
Member Candidate
Member Candidate
Topic Author
Posts: 220
Joined: Sat Jul 29, 2006 4:13 pm

Sat Apr 21, 2007 4:10 pm

yes, but ping goes from 100-10 000 ms
 
User avatar
chvdr
Member
Member
Posts: 403
Joined: Thu Sep 22, 2005 8:53 pm

Sat Apr 21, 2007 5:19 pm

Prism Chipset culd run better than atheros in this situation...

For Example Senao NL 2511+ (802.11b)

Regards
better use 802.11g miniPCI in high noise.
the problem you have is threated many times in this forum.


regards,
C. G.

Who is online

Users browsing this forum: No registered users and 29 guests