Community discussions

MUM Europe 2020
 
srisoeyono
just joined
Topic Author
Posts: 1
Joined: Fri Feb 14, 2020 5:33 am

Traffic between ether and wireless not same in bridge mode

Fri Feb 14, 2020 6:17 am

We're having problem with our traffic in bridge mode, im using RB911G as station bridge, but the running traffic are not same between wireless and ether, in wlan running traffic is 72-85 Mbps, but in ether just 54-71 Mbps, can anyone fix this ?
You do not have the required permissions to view the files attached to this post.
 
User avatar
bpwl
Member Candidate
Member Candidate
Posts: 161
Joined: Mon Apr 08, 2019 1:16 am

Re: Traffic between ether and wireless not same in bridge mode

Fri Feb 14, 2020 3:06 pm

Hi, can you verify with TORCH on both interfaces to see what ports and IP addresses/MAC adresses are passed, and which are missing.

Traffic to or from the bridge itself (to the router itself) will never pass to the other interface. (Winbox, terminal, snmp, syslog, DHCP, DNS ... and other services)
The bridge has many options about broadcast and multicast forwarding and the possibility for limiting them.
STP handling by the bridge, BPDU packets, and other bridge management traffic is not forwarded.
Some MAC addresses are not forwarded over a IEEE compliant bridge (reserved MAC addresses)

Who is online

Users browsing this forum: dmcdon and 22 guests