Maybe I missed something in the specifications, in which case I'm sorry
The question is why all devices are connected in "65Mbps-20MHz / 1S" instead of "130Mbps-20MHz / 2S" in TX Rate
In RX Rate all was fine ( "130Mbps-20MHz/2S" )
Example of client is "ASUS PCE-AC55BT B1" based on "Intel AC-8260"
Here is my Wi-Fi config:
There is no 2 spatial streams for download ?
Code: Select all
name="wlan1" mtu=1500 l2mtu=1600 mac-address=D4:CA:6D:6B:A7:0B arp=enabled interface-type=Atheros AR92xx mode=ap-bridge ssid="MikroTik" frequency=2462 band=2ghz-onlyn channel-width=20mhz secondary-channel="" scan-list=default wireless-protocol=802.11 antenna-mode=ant-a vlan-mode=no-tag vlan-id=1 wds-mode=disabled wds-default-bridge=none wds-ignore-ssid=no bridge-mode=disabled default-authentication=yes default-forwarding=yes default-ap-tx-limit=0 default-client-tx-limit=0 hide-ssid=no security-profile=default compression=no