Community discussions

MikroTik App
 
duke^
just joined
Topic Author
Posts: 17
Joined: Tue Jul 03, 2007 5:29 am

RB133C, R52: 2.4GHz and real throughput

Fri Jul 06, 2007 4:57 am

Hello,

If I used the 2.4 GHz (turbo mode) in a Mikrotik system (two bridges each with one RB133C and, obviously, one R52), what throughput should I expect?


Regards.
Last edited by duke^ on Fri Jul 06, 2007 11:44 pm, edited 2 times in total.
 
HellMind
Member Candidate
Member Candidate
Posts: 146
Joined: Mon Jun 26, 2006 11:58 pm

Re: RB133C, R52: 2.4GHz and real throughput

Fri Jul 06, 2007 11:11 pm

I tried this and its the same than normal mode :(

UDP max 25Mbit/s
 
duke^
just joined
Topic Author
Posts: 17
Joined: Tue Jul 03, 2007 5:29 am

Re: RB133C, R52: 2.4GHz and real throughput

Fri Jul 06, 2007 11:49 pm

I tried this and its the same than normal mode :(

UDP max 25Mbit/s
Did you get that result in half duplex mode?


Regards.
 
User avatar
broken
newbie
Posts: 29
Joined: Thu Dec 14, 2006 6:35 pm
Location: nowa ruda / poland
Contact:

Re: RB133C, R52: 2.4GHz and real throughput

Fri Jul 13, 2007 4:03 pm

Did you selected right channel to turn on Turbo mode in 2.4GHZ ?

I've expierienced that using Turbo (wide channel) is not quite well idea, cause interference from other wireless equipment. It's better to use 5GHZ band to provide much more quality links - especially when 5GHZ channels doesn't overlap each other. It means that you have all size channel (20MHZ) to use for data.

Who is online

Users browsing this forum: No registered users and 18 guests