Community discussions

MikroTik App
 
troffasky
Member
Member
Topic Author
Posts: 416
Joined: Wed Mar 26, 2014 4:37 pm

Sector Info changing rapidly

Wed Dec 02, 2020 9:56 pm

wAP 60Gx3 AP, Cube Lite60 station.
RouterOS 6.45.9.
I can see that the tx-sector and tx-sector-info values are fluctuating rapidly. Does this indicate physical instability of the unit(s)?
             connected: yes
             frequency: 58320
        remote-address: 48:8F:5A:88:97:6C
                tx-mcs: 1
           tx-phy-rate: 385.0Mbps
                signal: 20
                  rssi: -55
             tx-sector: 22
        tx-sector-info: right 1.8 degrees, down 1.2 degrees
              distance: 172.73m
  tx-packet-error-rate: 2%

             frequency: 58320
        remote-address: 48:8F:5A:88:97:6C
                tx-mcs: 1
           tx-phy-rate: 385.0Mbps
                signal: 100
                  rssi: -52
             tx-sector: 38
        tx-sector-info: right 1.8 degrees, up 0.4 degrees
              distance: 172.73m
  tx-packet-error-rate: 0%
-- [Q quit|D dump|C-z pause]
             frequency: 58320
        remote-address: 48:8F:5A:88:97:6C
                tx-mcs: 1
           tx-phy-rate: 385.0Mbps
                signal: 100
                  rssi: -52
             tx-sector: 38
        tx-sector-info: right 1.8 degrees, up 0.4 degrees
              distance: 172.73m
  tx-packet-error-rate: 2%
-- [Q quit|D dump|C-z pause]
             frequency: 58320
        remote-address: 48:8F:5A:88:97:6C
                tx-mcs: 1
           tx-phy-rate: 385.0Mbps
                signal: 100
                  rssi: -57
             tx-sector: 0
        tx-sector-info: left 2.6 degrees, down 2.6 degrees
              distance: 172.73m
  tx-packet-error-rate: 2%
-- [Q quit|D dump|C-z pause]
             frequency: 58320
        remote-address: 48:8F:5A:88:97:6C
                tx-mcs: 1
           tx-phy-rate: 385.0Mbps
                signal: 100
                  rssi: -55
             tx-sector: 21
        tx-sector-info: right 1.2 degrees, down 1.2 degrees
              distance: 172.73m
  tx-packet-error-rate: 1%

 
troffasky
Member
Member
Topic Author
Posts: 416
Joined: Wed Mar 26, 2014 4:37 pm

Re: Sector Info changing rapidly

Wed Dec 02, 2020 11:36 pm

Looks like this is something that happens for 5-10 minutes following a reboot. Rebooted this 5 times now and the numbers fluctuate for a bit, then settle down.
Shortly after reboot:
Image
A few minutes later:
Image

This must just be normal for 60G stuff, then?
 
troffasky
Member
Member
Topic Author
Posts: 416
Joined: Wed Mar 26, 2014 4:37 pm

[solved] Re: Sector Info changing rapidly  [SOLVED]

Thu Dec 03, 2020 1:28 pm

Who is online

Users browsing this forum: No registered users and 36 guests