RouterOS 6.45.9.
I can see that the tx-sector and tx-sector-info values are fluctuating rapidly. Does this indicate physical instability of the unit(s)?
Code: Select all
connected: yes
frequency: 58320
remote-address: 48:8F:5A:88:97:6C
tx-mcs: 1
tx-phy-rate: 385.0Mbps
signal: 20
rssi: -55
tx-sector: 22
tx-sector-info: right 1.8 degrees, down 1.2 degrees
distance: 172.73m
tx-packet-error-rate: 2%
frequency: 58320
remote-address: 48:8F:5A:88:97:6C
tx-mcs: 1
tx-phy-rate: 385.0Mbps
signal: 100
rssi: -52
tx-sector: 38
tx-sector-info: right 1.8 degrees, up 0.4 degrees
distance: 172.73m
tx-packet-error-rate: 0%
-- [Q quit|D dump|C-z pause]
frequency: 58320
remote-address: 48:8F:5A:88:97:6C
tx-mcs: 1
tx-phy-rate: 385.0Mbps
signal: 100
rssi: -52
tx-sector: 38
tx-sector-info: right 1.8 degrees, up 0.4 degrees
distance: 172.73m
tx-packet-error-rate: 2%
-- [Q quit|D dump|C-z pause]
frequency: 58320
remote-address: 48:8F:5A:88:97:6C
tx-mcs: 1
tx-phy-rate: 385.0Mbps
signal: 100
rssi: -57
tx-sector: 0
tx-sector-info: left 2.6 degrees, down 2.6 degrees
distance: 172.73m
tx-packet-error-rate: 2%
-- [Q quit|D dump|C-z pause]
frequency: 58320
remote-address: 48:8F:5A:88:97:6C
tx-mcs: 1
tx-phy-rate: 385.0Mbps
signal: 100
rssi: -55
tx-sector: 21
tx-sector-info: right 1.2 degrees, down 1.2 degrees
distance: 172.73m
tx-packet-error-rate: 1%