Community discussions

MikroTik App
just joined
Topic Author
Posts: 4
Joined: Mon Dec 16, 2019 9:38 pm

Output Power too high

Fri Jan 15, 2021 2:49 pm


i think i found a problematic bug with the country regulation and in combination with CAPsMAN.
If the setting no_country_set is used in CAPsMAN, i think the secure values of the CAPs are overwritten.
When using this setting the mean lifetime of severals wAP ac is about 6 months. In other posts on this forum i read, that the output power can not exceed the save level. How is this possible?
I think a wAP AC should only send with a max. power of 25dBm, when actually using no_contry_set it is 30dBm.
When setting the country regulation to a country and activating the option reselect intervall, the output was correct to regulations, but still too high for a wAP ac and it died now about a year after purchase.
Forum Guru
Forum Guru
Posts: 5414
Joined: Thu Mar 03, 2016 10:23 pm

Re: Output Power too high

Sat Jan 16, 2021 4:19 pm

I think you should communicate this directly with ... probably they'll want supout files from both units (CAPsMAN manager and CAP device) to verify that CAP device is indeed transmitting at power higher than HW limit.

Who is online

Users browsing this forum: Matta and 39 guests