Community discussions

MikroTik App
 
FaramirZA
just joined
Topic Author
Posts: 3
Joined: Sun Feb 14, 2021 11:30 am

Home Mesh Quick set config unexpected results

Sun Feb 14, 2021 11:49 am

I have two Mikrotik devices.
* HAP AC2 -RBD52G-5HacD2HnD
* HAP AC lite - RB952Ui-5ac2nD

My AC2 is the Primary router and I used Home Mesh to setup my Wifi. The Secondary device, AC lite, was put in caps mode and successfully connected to the Primary router.

I notice that my Wifi devices can't connect to the Primary device for WiFi. My WiFi is served by the Secondary device only. How do I get WiFi from both the devices to work? Is there something I need to do after choosing the Home Mesh Quick set and joining the Secondary device? I note that there are no Mesh configs under the Mesh config section. Only CapsMan seems to be configured by the Home Mesh Quick set.

If I am misunderstanding how Mesh works what recommendations is there to extend Wifi into another area of my house?
 
FaramirZA
just joined
Topic Author
Posts: 3
Joined: Sun Feb 14, 2021 11:30 am

Re: Home Mesh Quick set config unexpected results

Sun Feb 14, 2021 3:46 pm

I got it working. I don't know why it is working.

On the primary router I removed the WiFi, WLAN1 and WLAN2, from the CAP under wireless. Not sure why I'd want to remove it to make it work but that is what I needed to do. If there is a better way please let me know.

Who is online

Users browsing this forum: Matta and 30 guests