Community discussions

MikroTik App
 
magos75
just joined
Topic Author
Posts: 1
Joined: Tue Mar 02, 2021 10:54 am

cAP to connect CAPSMAN layer3 instead layer2

Tue Mar 02, 2021 11:18 am

Hi!

It's my special problem when an electricity fault down/up my cAP (one of 2 cAPs) reconnect to my MT router (RB4011iGS) on layer3 instead layer2.
I noticed this issue when my mobile is lower speedtest but connection is 5Ghz - 433Mhz:
- Layer2 : 150-250Mbit
- Layer3 : 35-45Mbit

I don't understand...Why?
I have cAPs ether1 port on IP config because receive sntp time syncrhone from MT router. But 2 cAPs same config exclude ip address and managed from Router Capsman.
I have few VLAN and BRIDGE. But this issue just sometimes happens.

Any idea?
The goal: The cAPs connet to my MT Router CAPSMAN Layer2 EVERYTIME!
How to solve it?

Thanks for reply...
 
User avatar
anav
Forum Guru
Forum Guru
Posts: 18958
Joined: Sun Feb 18, 2018 11:28 pm
Location: Nova Scotia, Canada
Contact:

Re: cAP to connect CAPSMAN layer3 instead layer2

Tue Mar 09, 2021 10:16 pm

Get rid of capsman until you can configure the router and capac properly without capsman.
Please include config of both.
/export hide-sensitive file=anynameyouwish
 
User avatar
genesispro
Member Candidate
Member Candidate
Posts: 283
Joined: Fri Mar 14, 2014 12:33 pm

Re: cAP to connect CAPSMAN layer3 instead layer2

Fri Mar 12, 2021 10:27 am

well I guess removing the IP of the capsman and keeping only the interface would force it to connect only via Layer2
 
erlinden
Forum Guru
Forum Guru
Posts: 1900
Joined: Wed Jun 12, 2013 1:59 pm
Location: Netherlands

Re: cAP to connect CAPSMAN layer3 instead layer2

Fri Mar 12, 2021 11:20 am

Can you please share both the configuration of the CAPsMAN and the CAP (and please post them between code tags):

CAPsMAN: /caps-man export
CAP: /export
 
gotsprings
Forum Guru
Forum Guru
Posts: 2087
Joined: Mon May 14, 2012 9:30 pm

Re: cAP to connect CAPSMAN layer3 instead layer2

Fri Mar 12, 2021 11:44 am

I need a wire diagram.

Who is online

Users browsing this forum: 0xsepa and 34 guests