Community discussions

MikroTik App
 
willmc
just joined
Topic Author
Posts: 1
Joined: Fri Mar 05, 2021 8:10 am

Wireless Network Error (Urgent issue)

Fri Mar 05, 2021 8:33 am

Hello,
Our product use RBM11G+R11e-5HnD and 18dBi MIMO antenna.

we installed from No.1 to 5, and video quality in the pc was good.
But when install No.6(not connected camera, only input power to No.6), Area 1, 2 CCTV video quality change very bad.
and Area 1,2,3 CCTV connected, No.2 disabled and No.1 connect to No 3( No.3 is AP bridge mode), then all CCTV quality change to good.


AP Bridge----(wireless)------Station Bridge-AP Bridge----(wireless)------Station Bridge-AP Bridge----(wireless)------Station Bridge
NV2

How can I solve this problem?
There is no IP collision.

Please help.
You do not have the required permissions to view the files attached to this post.
 
User avatar
mkx
Forum Guru
Forum Guru
Posts: 11383
Joined: Thu Mar 03, 2016 10:23 pm

Re: Wireless Network Error (Urgent issue)

Fri Mar 05, 2021 11:48 am

Investigate if RF channels, used for links 1-2, 3-4 and 5-6 overlap. Note that it's not enough that these use different channel numbers, it is necessary that there's no overlap of channels used. Use this document to verify frequency ranges used by individual channels (depending on channel width).

Who is online

Users browsing this forum: maigonis and 26 guests