To my existing Audience, which I’ve been using ok with all 3 wlan networks, I’ve decided to add another Audience (A2) that I plan to connect to the 1st one (A1) via Ethernet - I’m connecting it via Ethernet instead on the dedicated wlan3 because the area that I need it covered by A2 has some weird interference (most probably due to the apartment that is adjacent to ours) and only the 2.4ghz wlan has a decent signal.
I proceeded to setup A1 so that CAPSMAN would handle all 3 wlans and.. problem. I must be doing something wrong since wlan3 is up and running but has the wrong SSID (of the wlan2).
Not sure if it is a configuration problem or Audience simply doesn’t allow wlan3 to be part of CAPSMAN as a normal wlan (this would mean I have to return it).
I’m a noob in networking so config in Terminal is a bit hard - I started from a reset configuration of RouterOS and made the modifications via Winbox. The paradox is in the attached photo - what do I do wrong? What info more would help you for an advice?
Thanks
Alex