Community discussions

MikroTik App
 
hellcry
just joined
Topic Author
Posts: 3
Joined: Wed Apr 07, 2021 9:40 am

CAPSMan went to hell

Wed Apr 07, 2021 9:46 am

Hello,

I've setup capsman with certificates and all worked fine until this morning when I decided to update my routers via winbox. After upgrade routers work but cap keeps disconnecting from capsman in a loop and i dont know what to do anymore. I've tried to stop require cert, requested new cert everything i could think of. This is the second time this happens to me, very frustrating ...

What should I do now?
 
erlinden
Forum Guru
Forum Guru
Posts: 1900
Joined: Wed Jun 12, 2013 1:59 pm
Location: Netherlands

Re: CAPSMan went to hell

Wed Apr 07, 2021 9:49 am

Please share your config: /export hide-sensitive file=anynameyoulike
 
hellcry
just joined
Topic Author
Posts: 3
Joined: Wed Apr 07, 2021 9:40 am

Re: CAPSMan went to hell

Wed Apr 07, 2021 10:08 am

seem this reconnect cycle happens when i provision the cap interfaces, same ones that worked ok before upgrade

removed config, I figured out myself the problem, thanks to the two guys that had a look on it, sow file were downloaded 2 times
 
billjellis
Frequent Visitor
Frequent Visitor
Posts: 53
Joined: Mon Dec 15, 2014 11:04 pm

Re: CAPSMan went to hell

Sat Apr 10, 2021 4:46 am

I have issues with Capsman and "possible regulatory info mismatched with CAP" when I upgrade to 6.47.9 they were all set to auto. I have now started to set them manually.
5785/20-eCee/ac(30dBm) is what one is auto set to.
Even thou it say "possible regulatory info mismatched with CAP" they are still working.
hapAC lite connected to mANTs. the hap are in RV and in condos.

What was the problem you had?

Bill

Who is online

Users browsing this forum: Amazon [Bot] and 29 guests