I have already created a trunk port on the Cisco SW. Vlan 100 is for wlan1, Vlan 101 for wlan2 and Vlan 1999 is the mangement vlan that I would like to use to manage the AP. This is what I did and got the 2 wlan's working. Each gets their respective vlan's ip from the dhcp server. But I can't get the management aspect working.
Code: Select all
/interface bridge add name=bridge1
/interface bridge port add bridge=bridge1 interface=ether1
/interface bridge port add bridge=bridge1 interface=wlan1 pvid=100
/interface bridge port add bridge=bridge1 interface=wlan2 pvid=101
/interface bridge vlan add bridge=bridge1 tagged=ether1 untagged=wlan1 vlan-ids=100
/interface bridge vlan add bridge=bridge1 tagged=ether1 untagged=wlan2 vlan-ids=101
/interface bridge set bridge1 vlan-filtering=yes