I have this WAP LTE cat6 kit and I need to lock to a cell.
out of the box the modem connect to a cell that is the one I need to lock and the same where the smartphones are locked to.
Unfortunately when I lock the modem to this cell (but it is the same with others...) then after some minutes I have no more internet, even if I have an IP from Vodafone.
Code: Select all
[admin@MikroTik] > ip address print
Flags: X - disabled, I - invalid, D - dynamic
# ADDRESS NETWORK INTERFACE
0 ;;; defconf
192.168.88.1/24 192.168.88.0 bridge
1 D 100.105.5.128/32 100.105.5.128 lte1
[admin@MikroTik] > ip route print
Flags: X - disabled, A - active, D - dynamic,
C - connect, S - static, r - rip, b - bgp, o - ospf, m - mme,
B - blackhole, U - unreachable, P - prohibit
# DST-ADDRESS PREF-SRC GATEWAY DISTANCE
0 ADS 0.0.0.0/0 lte1 2
1 ADC 100.105.5.128/32 100.105.5.128 lte1 0
2 ADC 192.168.88.0/24 192.168.88.1 bridge 0
[admin@MikroTik] > interface lte apn print
Flags: * - default
0 * name="default" apn="mobile.vodafone.it" use-peer-dns=yes
add-default-route=yes default-route-distance=2