Page 1 of 1

how to reset MIKROTIK RB911G-2HPND

Posted: Sun May 09, 2021 3:16 pm
by akmodi
hi, Just checking -- how do I reset this ? Have tried the paperclip to the 2 piece metal coin / circle -- without luck.

BTW: I've forgotten the password. Thanks

Re: how to reset MIKROTIK RB911G-2HPND

Posted: Sun May 09, 2021 4:05 pm
by Dude2048
No power.
Push the button and keep it pressed.
Plug in the powercable.
Wait until user led starts blinking.
Release the clip

Re: how to reset MIKROTIK RB911G-2HPND

Posted: Sun May 09, 2021 6:15 pm
by akmodi
No power.
Push the button and keep it pressed.
Plug in the powercable.
Wait until user led starts blinking.
Release the clip
Hi Dude2048, Thanks for your reply.
I have POE -- so no power cable -- or would it be the same ?
"Push the button and keep it pressed." -- what button is this? Thanks

Re: how to reset MIKROTIK RB911G-2HPND

Posted: Sun May 09, 2021 6:24 pm
by Dude2048
A small hole with reset written. Paperclip needed. Poe should work.

Re: how to reset MIKROTIK RB911G-2HPND

Posted: Sun May 09, 2021 6:31 pm
by akmodi
Hi Dude2048, Thanks again for your reply.

I have the board only -- so there's no reset button

https://www.gowifi.co.nz/images/stories ... -2HPND.jpg

Thanks

Re: how to reset MIKROTIK RB911G-2HPND

Posted: Sun May 09, 2021 7:21 pm
by Dude2048
https://m.youtube.com/watch?v=rv3vVamcSbk

I assumed there was a button. There is not. The two half moon is the reset.

Re: how to reset MIKROTIK RB911G-2HPND

Posted: Mon May 10, 2021 1:10 am
by akmodi
OK -- guys - got it working -- I must have erroneously pressed CAPSLOCK when I put in the password.

Thought about it -- and I'm in. Thanks chaps.