Community discussions

MikroTik App
 
user20171204
just joined
Topic Author
Posts: 3
Joined: Mon Dec 04, 2017 3:02 pm

Reconnect CAP to CAPsMAN after Reinstallation of CAPsMAN

Sun May 16, 2021 9:21 pm

Hi,

I had to reinstall my hAP ac2 as the disk was full using the netinstaller and format the hard disk. (This was already tricky as an USB-LAN connector did not work with the netinstaller).

After reconfiguration of the hAP I am trying to reconnect a wAP ac via CAPsMAN with active "Lock to CAPsMAN" and using certificates. On the hAP ac2 it is working fine.
The provisioning of the WLAN configuration with active "Lock" is not working on the wAP ac. Using no "Lock" and Certificate "none" is working. Chaning the Certificate setting to "request" the provisioning will fail, too while "Lock" is disabled.

It could be to my understanding, that the CAP wAP ac has still the old certificate of the old hAP ac2 stored and does not accept the new certificates.

Am i right and if so what do I have to do?

If I am not right, what might block the lock to the capsman?

Thank´s for your help.

Who is online

Users browsing this forum: baragoon, morphema, Ponytred, robmaltsystems and 38 guests