the LTE cat6 modem is usually connected to the same cell-id
Code: Select all
Primary Band B3@20Mhz earfcn: 1850 phy-cellid: 435
Is it normal?
the device is a R11e-LTE6
regards
Primary Band B3@20Mhz earfcn: 1850 phy-cellid: 435
Italy - VodafoneWhat Country ?
Sorry but I do not understand your post.yes, this can be normal but your case is first with Primary Band PCI..
Some PCI can be only added to other one primary band and ISP can not share them to do connection to them.
General, at LTE6 you can enable only 2 bands and run cell monitor who will be try display you that pci from that two bands what it see at air.
they already sent to me the 028 firmware and I am using it since 2 or 3 weeks.For more clear situation, maybe a some firmware fix you can send e-mail to support@mikrotik.com, they can give you a new firmware 028 who fix some stuff but your problem is a first one.
I agree. cat.4 and cat6 are differ SoC vendor and that cat.6 is not greate selection.they already sent to me the 028 firmware and I am using it since 2 or 3 weeks.
Moreover, speedtest, same time, same cell, same provider:
cat4: 13 Mbps down \ 36 Mbps up
cat6: 10 Mbps down \ 20 Mbps up with 2 carriers aggregated.