just need some help to get my head around this thing.
I have a working capsman setup, that is privisioning several SSIDs, with their respective VLANs enabled to a set of CAP devices (using local forwarding in datapath)
What I need to do is to enable VLANs (hybrid port) on another physical port of a CAP.
Now, looking a a CAP device in capsman mode, that does not have a visible VLAN setup inside (no VLAN-Filtering on bridge.local, no wlan & VLAN ports on bridge as these are added dynamically, no VLAN config locally on bridge).
How am I to go about it?
I tried this (with a cAP-ac with VLAN ID=11 on ether2)...here's the export:
Code: Select all
/interface bridge
add admin-mac=48:8F:XX:XX:XX:XX auto-mac=no comment=defconf name=bridgeLocal vlan-filtering=yes
/interface bridge port
add bridge=bridgeLocal comment=defconf interface=ether1
add bridge=bridgeLocal comment=VL11 ingress-filtering=yes interface=ether2 pvid=11 # note: VID=11 untagged, all other traffic tagged via ether2
/interface bridge vlan
add bridge=bridgeLocal tagged=ether1 untagged=ether2 vlan-ids=11
...any ideas?
TIA,
hominidae