Hi All,
So i purchased 2 x Mikrotik Routerboard(RbcAPGi-5acD2nd). Only one is installed at the moment as im still running a standard Unify L/R at the other end of the house. I have a Tenda router(wireless off) which im dishing out DHCP and a standard DLINK gigabyte switch. My fibre is 100Mbps and getting about 92Mbps on ethernet.
This is what i have already done:
Used Winbox to configure settings.
Enabled AP bridge
Created 2 security profiles for wireless - 1 for main and the other for guest
Enabled 2 WLAN interfaces to obtain 2.4 and 5ghz.
Did a frequency scan for both interfaces and set a static config instead of auto.
Im using this access point as we speak.
My issues:
By default, they have ip 192.168.88.1. Any wireless clients connecting to them will get the AP DHCP range. Do i leave this setup as is?
Do i set a static IP to the first one if im going to add another? IP conflict 192.168.88.1?
Will i have an issue on my network having dhcp running on my ISP router and the AP?
How do i go about installing the second one with same SSID's? This is where i am really struggling.
I need roaming between the devices.
Currently my internet speeds are poor even if i stand right underneath the AP- i get around 60Mbps. Not sure if 5GHZ is working effectively. If i sit in my lounge which is about 5M away from the AP with line of sight, i get about 40Mbps. Certain days(seldom), i will get about 70Mbps on my devices.
Thanks in advance