Community discussions

MikroTik App
 
mahfuzazam
newbie
Topic Author
Posts: 37
Joined: Sat Aug 08, 2020 7:59 pm
Location: Usa
Contact:

hAP Ac3 Regulatory Domain Issue (Bangladesh)

Thu Jul 01, 2021 1:58 pm

Hi There Guys,

I've recently bought MikroTik hAP ac3 as my wireless router. I've done the settings checking forums and other videos. But, I'm facing issues with the setup of 5GHz WiFi.
Whenever I select "Bangladesh" as my regulatory domain, the following error "No supported channels, the scan list does not contain valid channels" is popping up.
But it works fine with the 2.4GHz band.
Is there any twaeks I can do to make it work and make it better?

My Wireless configuration is below:

/interface wireless security-profiles
set [ find default=yes ] supplicant-identity=MikroTik
add authentication-types=wpa2-psk eap-methods="" mode=dynamic-keys name=\
profile_mgX supplicant-identity="" wpa2-pre-shared-key=mgX!@#789xyz
/interface wireless
set [ find default-name=wlan1 ] adaptive-noise-immunity=ap-and-client-mode \
band=2ghz-g/n channel-width=20/40mhz-XX country=russia2 disabled=no \
distance=indoors frequency=auto hw-protection-mode=cts-to-self \
hw-retries=14 installation=indoor max-station-count=85 mode=ap-bridge \
security-profile=profile_mgX ssid=mgX-Banani wireless-protocol=802.11 \
wmm-support=enabled wps-mode=disabled
set [ find default-name=wlan2 ] adaptive-noise-immunity=ap-and-client-mode \
antenna-gain=3 band=5ghz-a/n/ac channel-width=20/40/80mhz-XXXX country=\
russia2 disabled=no distance=indoors frequency=auto hw-protection-mode=\
cts-to-self hw-retries=14 installation=indoor max-station-count=85 mode=\
ap-bridge security-profile=profile_mgX ssid=mgX-Banani wireless-protocol=\
802.11 wmm-support=enabled wps-mode=disabled


Thanks in advance.
You do not have the required permissions to view the files attached to this post.
 
User avatar
normis
MikroTik Support
MikroTik Support
Posts: 26289
Joined: Fri May 28, 2004 11:04 am
Location: Riga, Latvia

Re: hAP Ac3 Regulatory Domain Issue (Bangladesh)

Thu Jul 01, 2021 2:03 pm

Click on the "reset configuration" button on the right side.
Your channel width doesn't look right, it could be eeeC or something, not XXXX
 
User avatar
rextended
Forum Guru
Forum Guru
Posts: 11967
Joined: Tue Feb 25, 2014 12:49 pm
Location: Italy
Contact:

Re: hAP Ac3 Regulatory Domain Issue (Bangladesh)

Thu Jul 01, 2021 2:15 pm

russia2 on export and bangladesh on image?
 
User avatar
rextended
Forum Guru
Forum Guru
Posts: 11967
Joined: Tue Feb 25, 2014 12:49 pm
Location: Italy
Contact:

Re: hAP Ac3 Regulatory Domain Issue (Bangladesh)

Thu Jul 01, 2021 2:20 pm

Stop watching idiot videos on Youtube and paste this on terminal without omit { }
use this as good starting point
{
/interface wireless security-profiles
set [find] eap-methods=passthrough supplicant-identity=MikroTik
/interface wireless
set [find] adaptive-noise-immunity=none channel-width=20mhz hw-protection-mode=none hw-retries=7 max-station-count=62 wmm-support=disabled
set [find default-name=wlan1] antenna-gain=3 country=bangladesh installation=indoor frequency=2437
set [find default-name=wlan2] antenna-gain=5.5 country=bangladesh installation=outdoor frequency=5745
}

bangladesh 2GHz: no problem
bangladesh 5GHz: only outdoor 5745, 5765, 5785, 5805, 5825
but if the 5GHz smartphone do not support that range... do not work

russia2 2GHz: no problem,
russia2 5GHz: indoor 5180, 5200, 5220. 5240
all 5GHz smartphone support this

info country-info bangladesh 
  ranges: 5735-5835/a,an20,an40,ac20,ac40,ac80,ac160,ac80+80(30dBm)/outdoor
          2402-2482/b,g,gn20,gn40(20dBm)
          2417-2457/g-turbo(20dBm)
          902-927/b,g,g-turbo,gn20,gn40(30dBm)

info country-info russia2         
  ranges: 5815-6425/a,an20,an40,ac20,ac40,ac80,ac160,ac80+80(20dBm)/outdoor
          2402-2482/b,g,gn20,gn40(20dBm)
          2417-2457/g-turbo(20dBm)
          5170-5250/a,an20,an40,ac20,ac40,ac80,ac160,ac80+80(20dBm)/passive,indoor
          5250-5330/a,an20,an40,ac20,ac40,ac80,ac160,ac80+80(20dBm)/dfs,passive
          5650-5710/a,an20,an40,ac20,ac40,ac80,ac160,ac80+80(20dBm)/dfs,passive
          5755-5815/a,an20,an40,ac20,ac40,ac80,ac160,ac80+80(20dBm)/outdoor
          5190-5310/a-turbo(20dBm)/dfs
          5180-5300/a-turbo(20dBm)/dfs
          5520-5680/a-turbo(27dBm)/dfs,passive
          5510-5670/a-turbo(27dBm)/dfs,passive
          902-927/b,g,g-turbo,gn20,gn40(30dBm)
Last edited by rextended on Thu Jul 01, 2021 2:29 pm, edited 2 times in total.
 
mahfuzazam
newbie
Topic Author
Posts: 37
Joined: Sat Aug 08, 2020 7:59 pm
Location: Usa
Contact:

Re: hAP Ac3 Regulatory Domain Issue (Bangladesh)

Thu Jul 01, 2021 2:24 pm

Great thanks! I'll try this!
Also, can you suggest the best regulatory domain for utilizing most channels? I've selected russia2 based on that. But is there any better option?
Last edited by mahfuzazam on Thu Jul 01, 2021 2:30 pm, edited 1 time in total.
 
mahfuzazam
newbie
Topic Author
Posts: 37
Joined: Sat Aug 08, 2020 7:59 pm
Location: Usa
Contact:

Re: hAP Ac3 Regulatory Domain Issue (Bangladesh)

Thu Jul 01, 2021 2:25 pm

Click on the "reset configuration" button on the right side.
Your channel width doesn't look right, it could be eeeC or something, not XXXX
Okay. I Will reset the config and try again.
 
mahfuzazam
newbie
Topic Author
Posts: 37
Joined: Sat Aug 08, 2020 7:59 pm
Location: Usa
Contact:

Re: hAP Ac3 Regulatory Domain Issue (Bangladesh)

Thu Jul 01, 2021 2:27 pm

russia2 on export and bangladesh on image?
It was after the regulatory domain issue. Had to select one.
 
User avatar
rextended
Forum Guru
Forum Guru
Posts: 11967
Joined: Tue Feb 25, 2014 12:49 pm
Location: Italy
Contact:

Re: hAP Ac3 Regulatory Domain Issue (Bangladesh)

Thu Jul 01, 2021 2:30 pm

My post is corrected at 13:29, re-read it again, I add some info on countries
 
mahfuzazam
newbie
Topic Author
Posts: 37
Joined: Sat Aug 08, 2020 7:59 pm
Location: Usa
Contact:

Re: hAP Ac3 Regulatory Domain Issue (Bangladesh)

Thu Jul 01, 2021 2:38 pm

My post is corrected at 13:29, re-read it again, I add some info on countries
Noted with thanks!!
Appreciate the help.

Who is online

Users browsing this forum: Amazon [Bot], onnyloh and 24 guests