Initially i have RB4011 as main router and capsman controller as well + some CAP AC as access points. I had set up capsman controller with 2 vlans for 2 wifi netowrks and everything works well exept that i cant obtain ip address when connected to main router (it has wifi interfaces and i want to capsman it also).
For now i took hAP ac2 with default configuration and i setuped it similarly and i face exactly the same problem: i can connect to router from android, but i cant receive an ip address. Please tell me what setting am i missed?
Code: Select all
# model = RBD52G-5HacD2HnD
/caps-man channel
add band=2ghz-b/g/n frequency=2447 name=2.4
add band=5ghz-a/n/ac frequency=5180 name=5
/interface bridge
add admin-mac=74:4D:28:E5:0B:FF auto-mac=no comment=defconf name=bridge
add name=bridge26
/interface wireless
# managed by CAPsMAN
# channel: 2447/20-eC/gn(17dBm), SSID: 332123, local forwarding
set [ find default-name=wlan1 ] band=2ghz-b/g/n channel-width=20/40mhz-XX \
disabled=no distance=indoors frequency=auto installation=indoor mode=\
ap-bridge ssid=MikroTik-E50C03 wireless-protocol=802.11
# managed by CAPsMAN
set [ find default-name=wlan2 ] band=5ghz-a/n/ac channel-width=\
20/40/80mhz-XXXX distance=indoors frequency=auto installation=indoor \
mode=ap-bridge ssid=MikroTik-E50C04 wireless-protocol=802.11
/caps-man datapath
add bridge=bridge26 client-to-client-forwarding=yes local-forwarding=yes \
name=datapath26 vlan-id=26 vlan-mode=use-tag
/caps-man security
add authentication-types=wpa2-psk encryption=aes-ccm group-encryption=aes-ccm \
name=security26 passphrase=123456788
/caps-man configuration
add channel=2.4 country=russia datapath=datapath26 datapath.vlan-id=26 \
datapath.vlan-mode=use-tag mode=ap name=2.4 rx-chains=0,1,2 security=\
security26 ssid=332123 tx-chains=0,1,2
add channel=2.4 country=russia datapath=datapath26 datapath.vlan-id=26 \
datapath.vlan-mode=use-tag installation=indoor mode=ap name=5 rx-chains=\
0,1,2 security=security26 ssid=332123 tx-chains=0,1,2
/caps-man interface
add configuration=2.4 configuration.mode=ap configuration.ssid=eer disabled=\
no mac-address=00:00:00:00:00:00 master-interface=none name=cap26 \
radio-mac=00:00:00:00:00:00 radio-name=""
/interface list
add comment=defconf name=WAN
add comment=defconf name=LAN
/interface wireless security-profiles
set [ find default=yes ] supplicant-identity=MikroTik
/ip pool
add name=default-dhcp ranges=192.168.88.10-192.168.88.254
add name=pool26 ranges=192.168.26.10-192.168.26.50
/ip dhcp-server
add address-pool=default-dhcp disabled=no interface=bridge name=defconf
add address-pool=pool26 disabled=no interface=bridge26 name=dhcp26
/caps-man manager
set enabled=yes
/caps-man provisioning
add action=create-dynamic-enabled master-configuration=2.4 name-format=\
prefix-identity name-prefix=2g
add action=create-dynamic-enabled master-configuration=5 name-format=\
prefix-identity name-prefix=5g
/interface bridge port
add bridge=bridge comment=defconf interface=ether2
add bridge=bridge comment=defconf interface=ether3
add bridge=bridge comment=defconf interface=ether4
add bridge=bridge comment=defconf interface=ether5
add bridge=bridge comment=defconf interface=wlan1
add bridge=bridge comment=defconf interface=wlan2
/ip neighbor discovery-settings
set discover-interface-list=LAN
/interface list member
add comment=defconf interface=bridge list=LAN
add comment=defconf interface=ether1 list=WAN
add interface=cap26 list=LAN
/interface wireless cap
#
set bridge=bridge caps-man-addresses=127.0.0.1 enabled=yes interfaces=\
wlan1,wlan2
/ip address
add address=192.168.88.1/24 comment=defconf interface=bridge network=\
192.168.88.0
add address=192.168.26.1/24 interface=bridge26 network=192.168.26.0
/ip dhcp-client
add comment=defconf disabled=no interface=ether1
/ip dhcp-server network
add address=192.168.26.0/24 dns-server=192.168.88.1 domain=rds.local gateway=\
192.168.26.1 wins-server=192.168.88.1
add address=192.168.88.0/24 comment=defconf gateway=192.168.88.1
/ip dns
set allow-remote-requests=yes
/ip dns static
add address=192.168.88.1 comment=defconf name=router.lan type=A
/ip firewall filter
add action=accept chain=input comment=\
"defconf: accept established,related,untracked" connection-state=\
established,related,untracked
add action=drop chain=input comment="defconf: drop invalid" connection-state=\
invalid
add action=accept chain=input comment="defconf: accept ICMP" protocol=icmp
add action=accept chain=input comment=\
"defconf: accept to local loopback (for CAPsMAN)" dst-address=127.0.0.1
add action=drop chain=input comment="defconf: drop all not coming from LAN" \
in-interface-list=!LAN
add action=accept chain=forward comment="defconf: accept in ipsec policy" \
ipsec-policy=in,ipsec
add action=accept chain=forward comment="defconf: accept out ipsec policy" \
ipsec-policy=out,ipsec
add action=fasttrack-connection chain=forward comment="defconf: fasttrack" \
connection-state=established,related
add action=accept chain=forward comment=\
"defconf: accept established,related, untracked" connection-state=\
established,related,untracked
add action=drop chain=forward comment="defconf: drop invalid" \
connection-state=invalid
add action=drop chain=forward comment=\
"defconf: drop all from WAN not DSTNATed" connection-nat-state=!dstnat \
connection-state=new in-interface-list=WAN
/ip firewall nat
add action=masquerade chain=srcnat comment="defconf: masquerade" \
ipsec-policy=out,none out-interface-list=WAN
/tool mac-server
set allowed-interface-list=LAN
/tool mac-server mac-winbox
set allowed-interface-list=LAN