What is the current "official" way to vlan wlans?
In my simple case:
[cisco 1111] - trunk port --- (vlan id 11,12) --- trunk port - [cap ac] - wlan1, wlan2 --- ssid1 (vlan id 11), ssid2 (vlan id 11), ssid12 (vlan id 12)
not working either way (no dhcp from router to client on ssid1 if vlan mode use tag or pvid set to 11) which TOTALLY CONTRADICT each other:
https://wiki.mikrotik.com/wiki/Manual:VLANs_on_Wireless
(R2) - vlan mode use tag
viewtopic.php?f=23&t=143620
(Access Point) - pvid