Community discussions

MikroTik App
 
gregdhayes
newbie
Topic Author
Posts: 47
Joined: Wed Oct 04, 2006 5:35 am
Location: Osgood, IN
Contact:

XR7

Sat Apr 26, 2008 6:05 am

Will MT be supporting Ubiquiti's XR7 card?
 
User avatar
awamex
newbie
Posts: 25
Joined: Sat Apr 26, 2008 12:23 am
Location: Cancún
Contact:

Re: XR7

Sat Apr 26, 2008 6:31 am

Will MT be supporting Ubiquiti's XR7 card?
Hi

Some friends told me that Ubiquiti's XR7 are excellent option for MK.
 
gregdhayes
newbie
Topic Author
Posts: 47
Joined: Wed Oct 04, 2006 5:35 am
Location: Osgood, IN
Contact:

Re: XR7

Sat Apr 26, 2008 6:44 am

But are they going to support it? And if so, when?
 
jcremin
Member
Member
Posts: 360
Joined: Fri May 25, 2007 7:57 am

Re: XR7

Sat Apr 26, 2008 8:51 pm

I would assume it already works. It should work the same way as an XR9. You select a 2.4 ghz channel and use the frequency chart to convert to 700mhz. Has anyone ever used an XR7?

I have a public safety office that was asking me about wireless access to their emergency vehicles and they asked about 700mhz. I didn't know what was available for antennas and if the XR7 would work for them.

Any ideas?
 
gregdhayes
newbie
Topic Author
Posts: 47
Joined: Wed Oct 04, 2006 5:35 am
Location: Osgood, IN
Contact:

Re: XR7

Sat Apr 26, 2008 10:06 pm

Nope. I'll run it by Ubiquiti as well.

Might just buy two cards and antenna's and test. The cards are about $270 each.
 
jcremin
Member
Member
Posts: 360
Joined: Fri May 25, 2007 7:57 am

Re: XR7

Mon Jun 16, 2008 5:41 pm

Has anyone actually tested these yet? I'm still interested in how they perform and what kind of antennas are available.
 
gregdhayes
newbie
Topic Author
Posts: 47
Joined: Wed Oct 04, 2006 5:35 am
Location: Osgood, IN
Contact:

Re: XR7

Tue Jun 17, 2008 5:01 am

I've got the card installed, but need to mount the antenna (bout 230' up).

M2 Inc sells a 14Dbi yagi. We use quite a few of their m2-14's and 17's (900) with pretty good success.

Mike from UBNT says they work fine. Should start testing in a couple weeks.
 
User avatar
jordantrx
Long time Member
Long time Member
Posts: 505
Joined: Tue Oct 23, 2007 8:58 pm
Location: WAY upstate NY

Re: XR7

Tue Jun 17, 2008 3:47 pm

Dont you need a license to use the 700mhz Frequency? not just just checking. Also how far will it go? Is it really that much better than 900mhz.. I can see where you would get away from interference though... However costly expense to do so. -Jordan
~Agricultural WISP "ZONE"~ Beware of oncoming cattle and dont hit the farmer!!! I need to ask him about using his silo for an AP first"~

*Automated Billing Installer* http://wiki.mikrotik.com/wiki/AutomatedBilling Built by Krige ;-)
 
gregdhayes
newbie
Topic Author
Posts: 47
Joined: Wed Oct 04, 2006 5:35 am
Location: Osgood, IN
Contact:

Re: XR7

Wed Jun 18, 2008 7:03 am

Not that I'm aware. Should go, based on terrain and elevation about 30-35 miles.
 
0ldman
Forum Guru
Forum Guru
Posts: 1447
Joined: Thu Jul 27, 2006 5:01 am

Re: XR7

Wed Jun 18, 2008 6:30 pm

 
xbaha
Member Candidate
Member Candidate
Posts: 111
Joined: Fri Mar 09, 2007 12:16 pm

Re: XR7

Sun Jun 22, 2008 10:30 pm

XR7 is not supported
i have 2 cards, the client doesnt registed with the AP, i tried all the frequencies on the chart, nothing worked.
i contract MT, they told me they need to test it, and they dont have cards.
i contacted Michael Ford from ubnt.com, he said he will test it and come back to me, since then i never heared from him!

let me know if anyone got this thing working.
 
gregdhayes
newbie
Topic Author
Posts: 47
Joined: Wed Oct 04, 2006 5:35 am
Location: Osgood, IN
Contact:

Re: XR7

Sat Jun 28, 2008 2:10 am

Haven't got my antenna's up yet, but that is gonna suck. Those cards were $270 each + antenna's.
 
jo2jo
Forum Veteran
Forum Veteran
Posts: 972
Joined: Fri May 26, 2006 1:25 am

Re: XR7

Sat Jun 28, 2008 4:54 am

any word from mt direct on supporting these?

what about under version 2.9 or version 3?

tks
:beep :beep :beep
 
jcremin
Member
Member
Posts: 360
Joined: Fri May 25, 2007 7:57 am

Re: XR7

Sun Dec 07, 2008 10:07 pm

Any more results since the last post about this? I'm still curious.
 
User avatar
jwcn
Forum Guru
Forum Guru
Posts: 1501
Joined: Sun Aug 27, 2006 6:49 am
Location: Maryland, USA
Contact:

Re: XR7

Mon Dec 08, 2008 4:21 am

Curious here also.
 
gregdhayes
newbie
Topic Author
Posts: 47
Joined: Wed Oct 04, 2006 5:35 am
Location: Osgood, IN
Contact:

Re: XR7

Mon Dec 08, 2008 3:51 pm

Very poor results. Quarter mile away and signal was -87. Connected but browsing was very slow. Removed antenna from tower and will test elsewhere.

Worked great in my test office, but once deployed I couldn't get much signal. Antenna was about 85 foot up. Same SR9 can hit about 4-5 miles pretty good.
 
User avatar
jwcn
Forum Guru
Forum Guru
Posts: 1501
Joined: Sun Aug 27, 2006 6:49 am
Location: Maryland, USA
Contact:

Re: XR7

Mon Dec 08, 2008 5:01 pm

Interesting, what type of antennas were you using? Noise floor? What was your exact configuration/setup?
 
gregdhayes
newbie
Topic Author
Posts: 47
Joined: Wed Oct 04, 2006 5:35 am
Location: Osgood, IN
Contact:

Re: XR7

Tue Dec 09, 2008 12:48 am

The antenna's are M2 14dBi Yagi's (Horiz Polarity). The noise floor was about 100. No other 700 stuff anywhere near my equipment. Can't remember what channels we tried, but I know we tried several.

Has anybody else had any success with the SR7?
 
xbaha
Member Candidate
Member Candidate
Posts: 111
Joined: Fri Mar 09, 2007 12:16 pm

Re: XR7

Tue Dec 09, 2008 2:48 am

are we talking about XR7 or SR7???
what is SR7 ????

thanks.
 
gregdhayes
newbie
Topic Author
Posts: 47
Joined: Wed Oct 04, 2006 5:35 am
Location: Osgood, IN
Contact:

Re: XR7

Tue Dec 09, 2008 3:04 am

Typo
 
User avatar
micers
just joined
Posts: 21
Joined: Wed Feb 14, 2007 11:30 pm

Re: XR7

Thu Mar 05, 2009 11:30 pm

The antenna's are M2 14dBi Yagi's (Horiz Polarity). The noise floor was about 100. No other 700 stuff anywhere near my equipment. Can't remember what channels we tried, but I know we tried several.

Has anybody else had any success with the SR7?
The M2-Inc 700 MHz Yagi does not have the right bandpass characteristics for the XR7 card. According to M2-Inc the antenna, "The pass band gain has been designed to roll-off quickly above range limits to prevent receiver overload from other services just above 750 MHz."

You need a different antenna.

How did you get RouterOS to recognize the Ubiquiti XR7 card?
 
gregdhayes
newbie
Topic Author
Posts: 47
Joined: Wed Oct 04, 2006 5:35 am
Location: Osgood, IN
Contact:

Re: XR7

Fri Mar 06, 2009 1:46 am

It recognized it just fine. Just had to use the channels UBNT said to use.

I could try other antenna's but don't know who makes them. When I did my testing it was in my lab using paper clips. That's what we use for all our tests.
 
User avatar
micers
just joined
Posts: 21
Joined: Wed Feb 14, 2007 11:30 pm

Re: XR7

Fri Mar 06, 2009 5:28 am

It recognized it just fine. Just had to use the channels UBNT said to use.

I could try other antenna's but don't know who makes them. When I did my testing it was in my lab using paper clips. That's what we use for all our tests.
Thanks Greg;

Here is the pdf for the 14 dBi Yagi from M2Inc.
http://www.m2inc.com/main%20html/714AISPMAN.pdf
You can see that antenna is designed to drop off quickly above 750 MHz. Another thing that happens as you get away from the design frequency is the radiation pattern of the antenna changes and you loose more energy in the standing wave (return loss increases).

We bought a different antenna from someone, I am not sure who. The boss does the buying, all I do is spec them out.

You may find this parts list from DMS useful, though I don't think they sell small lots.
http://www.dmswireless.com/partnumber.htm

It is weird. I installed two XR7 radios today in RB433AH boards and RouterOS did not discover either of them.

I'll take them out, clean the contacts and try again tomorrow.

Again Thanks
 
CarulloS
Member
Member
Posts: 406
Joined: Thu Feb 02, 2006 5:52 am

Re: XR7

Fri Apr 17, 2009 6:11 am

Any update on this?

Scott
 
tonymobile
newbie
Posts: 37
Joined: Mon Jul 07, 2008 2:10 am

Re: XR7

Tue Jul 14, 2009 9:54 am

XR7 is not supported
i have 2 cards, the client doesnt registed with the AP, i tried all the frequencies on the chart, nothing worked.
i contract MT, they told me they need to test it, and they dont have cards.
i contacted Michael Ford from ubnt.com, he said he will test it and come back to me, since then i never heared from him!

let me know if anyone got this thing working.

Hi xbaha, i have 2 XR7 Cards installed in 2 Mikrotik 433AH with 3.25 ROS, but 2 card not register, i have tried all 2 ghz disponible frequencies. Testing is made in laboratory to 2 cm distance but without antenna. You have another idea???


Thanks.


Tony.
 
User avatar
normis
MikroTik Support
MikroTik Support
Posts: 24609
Joined: Fri May 28, 2004 11:04 am
Location: Riga, Latvia

Re: XR7

Tue Jul 14, 2009 10:19 am

2 cm distance but without antenna.
these two things are both very bad ideas :) attach some kind of antenna, and increase distance :P
No answer to your question? How to write posts
 
tonymobile
newbie
Posts: 37
Joined: Mon Jul 07, 2008 2:10 am

Re: XR7

Wed Jul 15, 2009 9:31 am

2 cm distance but without antenna.
these two things are both very bad ideas :) attach some kind of antenna, and increase distance :P
Ok Normis, i have attached a Antenna to MMCX and now work fine.

Where i can purchase Yagi 760-780 MHZ Antennas??? Now i must made test on the Way!!!!!!

See this http://1wirelessway.com/index.php?main_ ... cts_id=128 but vendor is not in Europe.

Thanks.

Who is online

Users browsing this forum: davidreaton and 31 guests