Community discussions

MikroTik App
 
ThunderBRZ
just joined
Topic Author
Posts: 13
Joined: Sun Feb 17, 2008 6:35 pm

Superchannel AP BRIDGE + NanoStation2 Client

Wed Sep 03, 2008 2:51 am

Hi

I have a rb333 + superchannel licence, use a Wireless Interface in 2.377Mhz AP Bridge mode

In my cliente, have a NanoStation2 new firmware open a 2.3 frequency Client Mode

and not works

any have idea 4 this???


tks
 
User avatar
sergejs
MikroTik Support
MikroTik Support
Posts: 6624
Joined: Thu Mar 31, 2005 3:33 pm
Location: Riga, Latvia
Contact:

Re: Superchannel AP BRIDGE + NanoStation2 Client

Wed Sep 03, 2008 12:15 pm

If you don't see AP on MikroTik device. It's clearly problem of the client device and you have to look where is the problem with used client device.
 
meno
Member Candidate
Member Candidate
Posts: 233
Joined: Sat Jul 19, 2008 4:45 am

Re: Superchannel AP BRIDGE + NanoStation2 Client

Thu Sep 04, 2008 3:22 am

did you try on another frequency? on RB333?


because the NS2 you have to put on compliance test.. and is 2.3 - 2.6 ghz
 
JR
Member Candidate
Member Candidate
Posts: 121
Joined: Tue Nov 08, 2005 3:27 am

Re: Superchannel AP BRIDGE + NanoStation2 Client

Fri Sep 05, 2008 11:06 pm

... also check, if the NS2 has frequency shifting enabled.
 
InoX
Forum Guru
Forum Guru
Posts: 1969
Joined: Tue Jan 09, 2007 6:44 pm

Re: Superchannel AP BRIDGE + NanoStation2 Client

Sat Sep 06, 2008 12:09 am

in 2377Mhz the signal will be lower than 2457 (exemple). Make sure you have enough signal.

Who is online

Users browsing this forum: No registered users and 36 guests