I have following configuration:
| | |
AP AP AP
The AP are RB433 with one active Ethernet and one WLAN.
The client´s (Scanner Symbol 9090) are the clients. We have the problem, when a client change the connection from an AP to another AP we can not ping these client. When the client send any traffic the ping works again.
So, we want to create a WDS. But I have same problem with this configuration.
1) Must all AP´s connect to the switch about the Ethernet-Interface or only one.
2) Must I add the Ethernet-Interface to the bridge interface.
3) Are there MASTER AP and SLAVE AP.