Community discussions

MikroTik App
 
jsuter
Frequent Visitor
Frequent Visitor
Topic Author
Posts: 57
Joined: Wed Nov 16, 2005 6:36 am
Location: Grapeland, TX

five R52's on one routerboard?

Thu Nov 20, 2008 5:12 am

I was wondering the maximum density you can achieve using R52 and R52H cards (or any suggestions on 'cleaner' cards for 11a use) at 5 ghz. I'm looking to install 5 5ghz links out of the one RB600-based box, 1x40mhz/nstream PTP, 1x20mhz/nstream PTP, 3x20mhz standard sectoral.

Thanks!
 
User avatar
bellis
newbie
Posts: 49
Joined: Wed Nov 05, 2008 1:15 am
Location: Woodland, WA
Contact:

Re: five R52's on one routerboard?

Thu Nov 20, 2008 9:45 am

i would highly advise not to use rb600 for that much load. have been testing a pair of them in our network and they are continuously locking up on us, cpu is constantly maxed. you will be much better off using 2 rb433ah instead.
"If it ain't broke, you're not tryin"
 
0ldman
Forum Guru
Forum Guru
Posts: 1447
Joined: Thu Jul 27, 2006 5:01 am

Re: five R52's on one routerboard?

Fri Nov 21, 2008 5:20 am

I'm interested as well.

I've got 3 RB600's, had issues with one rebooting, works fine after a /system routerboard upgrade

Who is online

Users browsing this forum: No registered users and 27 guests