Hi,
I need 100mbps full duplex link

Should I use MIKROTIK RouterBOARD 433AH and 3X RouterBoard R52H cards (turbo mode )and bond them together. Would the router have enought procesor power?

Or Should I use MIKROTIK RouterBoard 600A and 4X RouterBoard R52H cards and use 2X dual nstream and bond both dual nstream together?

Best regards,
David

As far as I know bonding does not provide full duplex link. Dual Nstreme link gives you full duplex.

You will need 6 cards per side and no more than 2 cards per routerboard.

using a pair of 333 outfitted with xr5 cards we have a link that do either 95Mbs up or 95Mbs down.
It is a half duplex link but performs well over 16Miles.

The speed is measured using a rb to rb speedtest tcp speeds are more like 65Mbs in each direction when tested.
Keep in mind those are single direction tests as the links are half duplex.

As far as I know bonding does not provide full duplex link. Dual Nstreme link gives you full duplex.

okay. how then to use more than two cards without any bonding here.
several nstreme2- s with load balancing or so?

is it possible to use 3, not two interfaces in a p2p link?

@tgrand
how many xr5 cards do you use on each rb333?

-----------------------------------------------

At on of my setups I get 60mbps in one direction using one mini pci card
If I would use 3mini pci cards and bond them together wouldn't I get 180mbps data transfer? that can be used for 90mbps ful duplex link?
would RouterBOARD 433AH have enought processor power?

I thought off 2 things...





would one of those examples work?