Community discussions

MUM Europe 2020
 
idelac3
just joined
Topic Author
Posts: 19
Joined: Mon Sep 25, 2006 12:16 pm

Nstreme question: enable-polling I don't understand!

Mon Dec 15, 2008 11:54 am

Hi,

any idea for enable-polling ?? Should I use it, or not?
I use nstreme on single point-to-point links, so I question myself about this feature. Is there any doc about nstreme to find out how it works?

-- Ig
 
User avatar
normis
MikroTik Support
MikroTik Support
Posts: 24338
Joined: Fri May 28, 2004 11:04 am
Location: Riga, Latvia

Re: Nstreme question: enable-polling I don't understand!

Mon Dec 15, 2008 11:56 am

polling could help you on point to multipoint setups.
from the manual:
Client polling reduces media access times, because the card does not need to ensure the air is "free" each time it needs to transmit data (the polling mechanism takes care of it)

NStreme Point-to-Multipoint - controlled point-to-multipoint mode with client polling (like AP-controlled TokenRing)
No answer to your question? How to write posts
 
idelac3
just joined
Topic Author
Posts: 19
Joined: Mon Sep 25, 2006 12:16 pm

Re: Nstreme question: enable-polling I don't understand!

Mon Dec 15, 2008 12:12 pm

Thanks. So, if I understand well, I should set enable-polling to no and put framer-policy to exact-size in order to get a bit better performance on p-t-p link. Or, I should not use nstreme at all?
 
User avatar
normis
MikroTik Support
MikroTik Support
Posts: 24338
Joined: Fri May 28, 2004 11:04 am
Location: Riga, Latvia

Re: Nstreme question: enable-polling I don't understand!

Mon Dec 15, 2008 12:34 pm

best-fit or dynamic-size would be best framer policy. you can leave polling On
No answer to your question? How to write posts
 
User avatar
Equis
Forum Veteran
Forum Veteran
Posts: 888
Joined: Mon Jun 06, 2005 6:48 am

Re: Nstreme question: enable-polling I don't understand!

Tue Dec 16, 2008 12:13 am

Leave polling on, it is better with point to point also.

Who is online

Users browsing this forum: No registered users and 14 guests