Community discussions

 
wireless12
Member Candidate
Member Candidate
Topic Author
Posts: 295
Joined: Fri Aug 31, 2007 10:49 am

how to do it

Tue Jan 27, 2009 2:59 pm

hello.
how to do the correct grounding of 411A. will the grounding of RB is sufficient for stability or we have to ground minipci as well separately.

is any snapshot available how to do grounding. pls show me.

thx n regards
 
wireless12
Member Candidate
Member Candidate
Topic Author
Posts: 295
Joined: Fri Aug 31, 2007 10:49 am

Re: how to do it

Wed Jan 28, 2009 11:22 am

no idea?
 
User avatar
janisk
MikroTik Support
MikroTik Support
Posts: 6283
Joined: Tue Feb 14, 2006 9:46 am
Location: Riga, Latvia

Re: how to do it

Wed Jan 28, 2009 3:02 pm

so you have to ground routerboard. If minipci have some additional grounding provided you have to check if that is because minipci card does not sue grounding from pci slot or that is just additional.

Routerboards you can buy all have minipci slot connected to grounding of the board.
 
angboontiong
Forum Guru
Forum Guru
Posts: 1115
Joined: Fri Jan 16, 2009 9:59 am

Re: how to do it

Fri Jan 30, 2009 11:34 am

If you install it outdoor.
this is the few thing you need to take care.

1) If it connected to the external antenna, then the antenna have to ground to the building ground, as well the RF surge arrester.

2) For you router board or the POE surge protector, you only can ground it to the AC ground but no to the building ground.

*remember, if you done mistake, the ground will become a loop and your devices may damange by the lightning strike, the static charge of the lightning.

Who is online

Users browsing this forum: MSN [Bot] and 37 guests