I have problem with this Routerboard, I have installed on it three Mini pci cards, xr5 + xr5 and r52h, and every 3 minutes routerboard is restarting, for example three days its work without problems, but after three days its begins restarting, I have this problem with two routerboards

Maybe you are not feeding it enough power?

Please if someone can i will give my servers IP and using remote desktop you can look at my configuration, Can anyone help me?

Here is Prin screen

what do your logs say about the reboots?

Nothing, only oher end says data from unknow device sent deauth, is it good voltage???

disable watch dog timer
under system watchdog


i found thisproblemon some 535 and 433 and disabling watchdog timer did it forme

its not helps, this two days it was working fine but know it begins again, Maybe this happening because outside is raining, but when i am opening box of mikrotik is very dry, what can be other reason???

did you upgrade it to 2.23

what version os what it on when you bought it

what power are you supplying the board with

when it does it have you tryed to create a support.rif file and send it to support?

did you upgrade it to 2.23
I have 3.24 Os version

what version os what it on when you bought it
I dont remember

what power are you supplying the board with
http://www.wifi-stock.com/details/24v_dc_adapter.html

when it does it have you tryed to create a support.rif file and send it to support?
I dont know how to do this? can you help me

here read this will explane everything

http://wiki.mikrotik.com/wiki/Support_Output_File

and if i have a llok at the print screen you uploaded it ses you have v 3.23

Yes I have updated now I have v3.24

so you are running on 3.24 and ameprobel you did a /system routerboard upgrade
and do you ahve anything on the serial port?

do you have anything in system scheduler
have you tryed a system reset and reconfiger the board to see if it changes

did you use netinstall to upgrade to 3.24?

so you are running on 3.24 and ameprobel you did a /system routerboard upgrade
and do you ahve anything on the serial port?

do you have anything in system scheduler
have you tryed a system reset and reconfiger the board to see if it changes

did you use netinstall to upgrade to 3.24?

I have nothing on serial port, I have upgrade it using winbox, and I have reseted configuration but it didnot help, can it be cable problem?

how are you supplying the board direct with power or via a poe


ryt to do a netinstall instead of a winbox upgrade
here is a how to

http://wiki.mikrotik.com/wiki/Netinstall
reset it from scrach so dont use the keep config option
can you post config files if this dont work